Top seller
No results were found for the filter!
Frame with drawer for 12 collection tubes for... Wooden frame for 12 collection tubes with drawer for the tool set Measurements: Maße: 245 x 135 x 84 mm
€126.00
PX - MFC 90 D drive unit 230V/EU with blade... Dry, brittle or fibrous food can be ground with the mill (with a hammer or chopped mill) for analysis. For introduction into the sample vessel, the material to be ground slides through the integrated sieve insert, which has a defined...
€8,288.00
Cutting Mill Cutting mills are used for the comminution of soft, medium-hard, elastic, fibrous and heterogeneous material mixtures. The SM 100 is the reasonably priced base model among the RETSCH granulators. With the powerful 1.5 kW motor and a...
from €6,860.00
PX - MFC 90 D drive unit 230V/EU Dry, brittle or fibrous food can be ground with the mill (with a hammer or chopped mill) for analysis. For introduction into the sample vessel, the material to be ground slides through the integrated sieve insert, which has a defined...
€7,852.00
Cutting Mill PULVERISETTE For the comminution of soft to medium-hard, dry grinding materials and fibrous materials or materials containing cellulose and plastics. Max. feed size: 70 x 70 mm Max. feed size: (depends on material) 70 x 70 mm Max. throughput...
€6,526.00
Standard funnel for long- and bulk solids With the standard hopper for bulk and bulk material, a large part of all samples can be abandoned. This standard funnel can be used both for the application of free-flowing ground material and for the discharge of straw, foils and...
€1,111.00
Rotor tempered steel with rotating and fixed... The rotor made of tool steel with straight cutting edges, which are parallel to the counter knives, is suitable for good cutting material such. Hay, straw, fibrous and biological materials.
€1,796.00
Universal support stand Universal under frame for free-standing support of the PULVERISETTE 15, PULVERISETTE 19, PULVERISETTE 25 and the cross beater mill PULVERISETTE 16.
€561.00
Standard rotor with V-cutting edges and fixed... Standard rotor with V-cutting edges and counter blades made of tool steel. Crushes the sample gently by a pure cutting stress. Alternatively, a rotor with V-cutters and counter-blades made of carbide tungsten carbide is offered, which...
€3,331.00
Standard rotor with V-cutting edges and fixed... Standard rotor with V-cutting edges and counter blades made of tool steel. Crushes the sample gently by a pure cutting stress. Alternatively, a rotor with V-cutters and counter-blades made of carbide tungsten carbide is offered, which...
€2,681.00
Knife Mill GRINDOMIX GM 300 The GRINDOMIX GM 300 knife mill is suitable for quick and gentle comminution and homogenization, especially of food. It processes substances with a high water, oil or fat content as quickly and reliably as dry, soft and medium-hard...
€7,730.00
Bottom sieve SM square holes 8.00 mm Bottom sieves for cutting mill SM 100 / 200 / 300. Description Square holes. Aperture size 8.00 mm.
€184.00
Bottom sieve SM square holes 6.00 mm Bottom sieves for cutting mill SM 100 / 200 / 300. Description Square holes. Aperture size 6.00 mm.
€184.00
Bottom sieve SM square holes 4.00 mm Bottom sieves for cutting mill SM 100 / 200 / 300. Description Square holes. Aperture size 4.00 mm.
€184.00
Bottom sieve SM (made of stainless steel) Bottom sieves for cutting mill SM 100/200 / 300. Description Square holes. Aperture size 2.00 mm
€184.00
Bottom sieve SM Bottom sieves for cutting mill SM 100 / 200 / 300. Description Trapezoid holes. Aperture size 1,50 mm.
€184.00
Bottom sieve with trapezoidal perforation Bottom sieves for cutting mill SM 100/200/300. Description Trapezoid holes. Aperture size 1.00 mm
€184.00
Bottom sieve with trapezoid perforation Bottom sieve for SM stainless steel trapezoid holes 0.75 mm.
€184.00
Bottom sieve with trapezoidal perforation Bottom sieve for SM stainless steel trapezoid holes 0.5 mm.
€184.00
Bottom sieve SM square holes 10.00 mm Bottom sieves for cutting mill SM 100 / 200 / 300. Description Square holes. Aperture size 10.00 mm.
€184.00
6-disc rotor for cutting mill SM 100 / SM 200 /... Stainless steel rotor, tungsten carbide reversible cutting plate.
€2,520.00
Parallel cut rotor for cutting mill SM 100 / SM... Rotors and Receptacles SM 100 / 200 / 300. Further accessories as hoppers and bottom sieves available on request. Description Parallel section rotor stainless steel
€2,520.00
