Top seller
WESTMED ® NitrilGuard examination gloves, extra... Content 100 piece(s) (€0.04 / 1 piece(s))
from €3.95
No results were found for the filter!
Staining inserts, with glass jar Staining inserts For microscope slides with width 26 mm Staining inserts made of stainless steel Circular With glass jar with ground-in cover with knob Suitable for serial stainings Especially for the Papanicolaou method
from €129.45
UV-macro cuvette UV-macro cuvette Light path : 10 mm Ideally suited for determinations in water analysis, chemistry and in life science applications. Usable with most polar solvents, acids and alkaline solutions. Drastically reduced risk of contamination...
Content 100 piece(s) (€0.00 / 1 piece(s))
from €0.35
UV-micro cuvette UV-micro cuvette Light path: 10 mm Specially designed for photometric determination of proteins, ssDNA, dsDNA, RNA and oligonucleotides in the UV range. Usable for wavelengths from 230 nm, ideally suited for measurements at 260 nm, 280...
Content 500 piece(s) (€0.00 / 1 piece(s))
from €0.27
Screw neck vial N8-1.5 Screw neck vial N 8 Outer diameter: 11.6 mm Outer height: 32 mm Flat bottom Small opening
Content 100 piece(s) (€0.15 / 1 piece(s))
from €15.00
Short-thread bottles ND9, clear glass 1,5ml Short Thread Vials ND9 1st hydrol. class Wide opening 100 pieces in PP-Box
Content 100 piece(s) (€0.14 / 1 piece(s))
from €13.66
Pipette tips, racked, DNA-, RNase-free TipRack Pipette tips made of high quality polypropylene Free from DiHEMDA and Oleamide Without plasticizer Cadmium-free color pigments Graduate for quick volume control Space-saving and environmentally friendly refill system for the TipBox The...
Content 960 piece(s) (€0.04 / 1 piece(s))
from €42.70
Filter tips, racked, DNA-, RNase-free TipRack Pipette tips made of high quality polypropylene Free from DiHEMDA and Oleamide Without plasticizer Cadmium-free color pigments The non-self-sealing filter tips have a PE filter that is free of chemical additives Due to the combination of...
Content 960 piece(s) (€0.08 / 1 piece(s))
from €76.35
Gas securitytubing, pre-assembled Gas securitytubing For gas burner according to DIN 30 665 and all gases according to DVGW-worksheet G 260 Operating pressure up to 100 mbar DIN - DVGW- Reg.- Nr. DG - 4607 AU 2366 With end fitting and reinforcement
from €54.72
DURAN® Three-way stopcock, T-bore DURAN®, borosilicate glass, with solid key and 3-part valve safety catch Interchangeable NS chicks with T-bore With thread and tap lock
from €33.44
DURAN® Separating funnel stopcock, Gilson type Very good chemical resistance Very good temperature resistance For glass manipulators.
from €20.75
DURAN® Separating funnel stopcock, with short... Very good chemical resistance Very good temperature resistance For glass manipulators.
from €23.28
DURAN® Single way stopcock, Taper 1:5, with... DURAN®, borosilicate glass 3.3, clear, with PTFE key. Replaceable NS keys Screw thread retaining device Straight bore
from €21.90
DURAN® KPG stirrer bearing, HB 10 DURAN® KPG stirrer bearing Interchangeable Bearing surface ground and polished With screwthread and cone Labelling HB 10 KPG bearing nominal diameter 10 mm Length 75 mm Thread GL 32
from €77.80
Plate holder for glass ceramic laboratory... Plate holder for glass ceramic laboratory protection plates made of chrome-nickel steel
from €37.23
Extraction thimbles Extraction thimbles, IDL Extraction thimbles made of cellulose for use with a number of extractor systems (e.g. Soxleth) Can be used for many types of extractions, for example determination of fat content in food, paints, varnishes etc....
Content 25 piece(s) (€2.75 / 1 piece(s))
from €68.76
Folded filter for qualitative analyses Folded filter for qualitative analyses, made of 100% cellulose, Medium-quick filtering. Filtering speed acc. to Herzberg: 50 s Retention range: 5 - 8 µm Grammage: 87 g/m² Paper thickness: 0,16 mm Packaging unit: 100 counts in dispensing box
Content 100 piece(s) (€0.28 / 1 piece(s))
from €27.99
Buffer solution acc. to DIN 19266, 500 mL Made of primary reference materials. Measured by a combination electrode, calibrated in accordance with DIN 19268. Deviation of pH value at a temperature of 20°C: ±0.
Content 500 piece(s) (€0.02 / 1 piece(s))
€11.67
Grinding jar (hardened steel) With screwable lid Jar volume 5 ml For sample quantities 0,5 - 2 ml Material: hardened steel, 1.2080
€663.00
Grinding bowl (zirconium oxide) Grinding bowl with lid and seal Material zirconium oxide ZrO2 Very good abrasion resistance For fibrous abrasive samples
from €3,203.00
Grinding bowl (zirconium oxide), with steel casing Zirconium oxide grinding bowl with steel frame Material zirconium oxide - ZrO2 Very good abrasion resistance For medium-hard, brittle samples
from €2,931.00
Grinding bowl (hardmetal tungsten carbide) Grinding bowl with lid and seal Grinding bowl volume 80 ml Net capacity 1 to 30 ml Net weight 2.4 kg Material tungsten carbide - WC - GC10 Very good abrasion resistance For hard abrasive samples
from €3,394.00
Grinding bowl (sintered corundum) Grinding bowl with lid and seal For medium-hard Fibrous samples Due to good abrasion resistance Material sintered corundum 99.7% - Al2O3
from €881.00
Grinding jar CryoMill (stainless steel) With screwable lid Material rustproof steel, 1.4112
from €683.00