Top seller
No results were found for the filter!
LT200 Dry thermostat with 2 separate heating... Pre-programmed for all standard digestions and freely programmable for user specific digestions 2 separately controllable heating blocks with separate protection covers, both blocks each with 15x13mm holes Illuminated digital display for...
€2,604.00
LT200 Dry thermostat with 2 separate heating... Pre-programmed for all standard digestions and freely programmable for user specific digestions 2 separately controllable heating blocks with separate protection covers, both blocks each with 6x13mm and 4x20mm holes Illuminated digital...
€2,604.00
DRB 200-2 Dry thermostat with 2 separate... Pre-programmed for standard digestions (e.g. for Ptot, TN or metals) and freely programmable for user specific digestions. Equipped with a large readable display and a digital timer with an automatic switch-off and acoustic signal....
€2,604.00
DRB 200-1 Dry thermostat with 1 heating block Pre-programmed for standard digestions (e.g. for COD, Ptot or heavy metals) and freely programmable for user specific digestions. Equipped with a large readable display and a digital timer with an automatic switch-off and acoustic...
€1,543.00
DRB 200 Dry thermostat with 2 separate heating... Equipped with a large readable display and a digital timer with an automatic switch-off and acoustic signal. Operational safety guaranted by protection lid covering the heating block, by the insulated external shell and by an integrated...
€2,604.00
DRB 200 Dry thermostat with 1 heating block Pre-programmed for standard digestions (e.g. for TN or metals) and freely programmable for user specific digestions. Equipped with a large readable display and a digital timer with an automatic switch-off and acoustic signal. Operational...
€1,543.00
behrotest® Row extraction apparatus Inexpensive and user-friendly equipment for Twisselmann extraction Each sample point individually adjustable Cooling water distribution strip ensures even cooling at all sample points Practical radiator shut-off bar for safe storage of...
from €3,116.00
Grinding jar (hardened steel), Vibration mill,... With screwable lid Material: hardened steel, 1.2080
from €876.00
Grinding bowl (sintered corundum) Grinding bowl with lid, seal and labeling field For medium-hard Fibrous samples Conditionally good abrasion resistance Material sintered corundum 99.7% - Al2O3
from €2,004.00
Polytron® PT-MR Tripod disperser in the 500 watt class: For volumes 0.05 - 2500 ml WxHxD 157 x 76 x 236 mm, 1.8 kg Digital LED speed display, soft start Drive with 500 Watt motor, 230 V, 50/60 Hz Space-saving "slim line" enclosure with sound insulation...
from €2,089.00
Extractor, cone NS 29 For extraction from liquids with specific heavy extractants, with feed filter (porosity: 0), made of DURAN® pipe.
from €207.47
Rotating sample divider HAVER RPT The Rotary Sample Divider provides small but representative sample volumes of solids and suspensions. This sample divider combines three division procedures in one device and offers the best possible sample division today. Due to the...
€8,830.00
Rotating sample divider HAVER RPT The Rotary Sample Divider provides small but representative sample volumes of solids and suspensions. This sample divider combines three division procedures in one device and offers the best possible sample division today. Due to the...
€10,420.00
PX - MFC 90 D drive unit 230V/EU with blade... Dry, brittle or fibrous food can be ground with the mill (with a hammer or chopped mill) for analysis. For introduction into the sample vessel, the material to be ground slides through the integrated sieve insert, which has a defined...
€8,288.00
Sonotrode titanium plate TT 13 FZ, For FZ 5 / 7 G Sonotrode titanium plate TT 13 FZ : Made of titanium alloy Diameter 13 mm For step horn FZ 5 G / booster horn FZ 7 G
€126.00
MS 73 Sonotrode micropoint MS 73, titan's alloy, diameter 3 mm, length approx. 175 mm. For step horn SH 70 g / Boosterhorn of SH 214 G. The Sonotrode transfers the mechanical oscillations into the test. Thermo-solidly, autopiano-cash and...
€179.00
Continuous flow-through vessel DG 4 G, For HD... Stainless steel sonicator Flow vessel DG 4 G : For continuous flow sonication for example emulsifying, dispersing or homogenizing, up to 30 l / h The sample can be sonicated several times in the circuit For connection to SH 70 G or SH...
€1,751.00
Flow-through vessel DG 5 (made of glass), For... Flow-through vessel DG 5, made of glass With cooling jacket, for sonication of larger quantities in the flow The cooling jacket allows a temperature control by liquid coolant during the sound For sonotrodes up to 25 mm, 80 ml stationary...
€388.00
Sonotrodes VS 200 T, For HD 2200/3200 with SH... Sonotrode VS 200 T : Long Diameter 25 mm Made of titanium alloy A high amplitude means a particularly intense sound Thermostable, autoclavable and resistant to corrosive media The sonotrode transmits the mechanical vibrations into the...
€477.00