Top seller
No results were found for the filter!
Star knife A 10.2 Star knife A 10.2 for fibrous materials such as paper and plant material, but also plastics and other material with low specific weight.
€180.00
Basic Grinder A 10 basic The redesigned batch mill grinds hard, brittle, soft, and fibrous materials for volumes up to 50 ml. Because samples may be embrittled directly in the grinding chamber, tough, oily, and aqueous samples can also be ground. The development...
€2,380.00
ACS additional cooling system for behrosog 3,... ACS additional cooling system for behrosog 3 consisting of stand, bottle and cooler
€785.70
Process extraction system BEHROSOG 3 with... Process extraction system BEHROSOG 3 with vacuum pump 40 l/h for suction and washing of aggressive acid vapours 230V 50 Hz
€2,767.00
behrotest Infrared Kjeldahl nitrogen digestor... Infrared rapid digestion devices for nitrogen determination according to Kjeldahl The digestion units of the model series behrotest® InKjel are equipped with a high-performance infrared heater. Quality and position of the behr infrared...
€5,369.00
K8 behrotest digestion apparatus set for 8 x 250 ml vessels, Temperature and time control, programmable, *230V/50Hz* The set consists of: Heating block K 8 Insert frame (B00218094) 8 digestion vessels (B00217959) Fuming device Kjeltabs catalyst tablets 1000 pcs (B00217937)...
€3,045.00
Working chamber Standard version (with... With single mechanical seal, material combinations: A: QBV (SiC-Carbon resin imprignated-Viton) / B: QBE (SiC-Carbon resin imprignated-EPDM) / C: QBE (SiC-Carbon resin imprignated-Kalrez6375) / D: QBE (SiC-Carbon resin...
€14,568.00
Inlet flange with injector and valve needle for... product connection G1 / 2", injector with hose ø 8 / 6 mm, with valve needle and hose nipple ø 10 / 6 mm
€2,428.00
Frame with drawer for 12 collection tubes for... Wooden frame for 12 collection tubes with drawer for the tool set Measurements: Maße: 245 x 135 x 84 mm
€126.00
Generator MTG 40 / 6FFV for drive MT 5100 S2 Ø Stator/rotor (mm) 41/46 Max. Shear rate 1/s 92000 Max. tip speed m/s 35
€6,024.00
Generator MTG 40 / 6FF for drive MEGATRON® MT... ø Stator/Rotor (mm) 41/46 Max. shear rate 1/s 62500 Max. tip speed m/s 35
€5,847.00
Generator MTG 40 / 6VF for drive MEGATRON® MT... ø Stator/Rotor (mm) 41/46 Max. shear rate 1/s 98000 Max. tip speed m/s 35
€5,570.00
Generator MTG 40 / 6F for drive MEGATRON® MT... ø Stator/Rotor (mm) 41/46 Max. shear rate 1/s 66500 Max. tip speed m/s 37
€5,320.00
Generator MTG 40 / 4M for drive MEGATRON® MT... ø Stator/Rotor (mm) 39/49 Max. shear rate 1/s 37000 Max. tip speed m/s 37
€4,832.00
Generator MTG 40 / 2G for drive MEGATRON® MT... ø Stator/Rotor (mm) 37/36 Max. shear rate 1/s 63500 Max. tip speed m/s 35
€3,357.00
Generator MTG 30/4F for drive MEGATRON® MT 5100 S2 ø Stator/Rotor (mm) 31/37 Max. shear rate 1/s 62000 Max. tip speed m/s 34
€3,878.00
Generator MTG 30/2M for drive MEGATRON® MT 5100 S2 ø Stator/Rotor (mm) 31/37 Max. shear rate 1/s 58000 Max. tip speed m/s 32
€2,968.00
LT200 Dry thermostat with 1 block, 9 x 13 mm /... Pre-programmed for all standard digestions and freely programmable for user specific digestions 9x13mm and 2x20mm holes Integrated protection cover Illuminated digital display for remaining time/temperature and operator guidance 3...
€1,600.00
MEL/MPN coliform laboratory consumables... Scope of delivery: 50 pre-sterilised inoculation loops, 50 pre-sterilised 10 mL pipettes and 100 pre-sterilised Whirl-Pak bags.
€785.00
Absorbent Pad with Dispenser, 10 x 100 pieces Dispense a clean cellulose pad into a petri dish quickly and easily with this absorbent pad kit. One hundred sterile, 47 mm pads are packed in each tube. Each tube slips quickly into the provided hand dispenser for easy use. Gamma...
€319.00