Top seller
No results were found for the filter!
Triple clamp 18/10 steel Shaft diameter 15 mm Holder for Schott-flanges to change the vessel and lid alternating
from €744.87
Scrubber Bottles Bottle made of PFA PTFE top with two threaded connections The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread It can be exchanged with the PTFE gas distributor with...
from €357.67
BOLA KPG glass stirrer shaft, PTFE KPG stirrer shaft with double pivot made of ground and polished borosilicate glass Tiltable moon-shaped stirrer blade with double-sided groove completely made of PTFE For vessels with a 29/32 ground...
from €195.06
KPG stirrer shaft made of borosilicate glass, tiltable moon-shaped stirrer blade with angular groove and clamping bolts completely made of PTFE. For vessels with a 29/32 Ground joint. Universal chemical resistance since the product is...
from €101.00
Completely made of PTFE, with angular groove. For vessels with a 29/32 Ground joint., dimensions: Suitable for ml 100, Bore dia. mm 5,8, Blade dimensions mm 50 x 24 x 3
from €6.11
Propeller blade These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA stirrer shafts by means of the clamp screws. A spanner wrench is included...
from €86.61
U-shaped blade These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA stirrer shafts by means of the clamp screws. A spanner wrench is included for...
from €89.94
Paddle These solid stirrer blades are made of PTFE and have a set of clamp screws made of a PTFE/PEEK compound. The blades can be fixed tightly on BOLA stirrer shafts by means of the clamp screws. A spanner wrench is included for easy...
from €76.12
With integrated, exchangeable special gasket made of PTFE and an FKM o-ring., dimensions: For stirrer shaft dia. mm 8, Total length mm 57
from €19.60
Impeller stirrer shaft PTFE-jacketed stainless steel shaft Impeller completely made of PTFE with three blades bent backwards Lower side of impeller either even or 15° angled Universal chemical resistance since the product is only exposed...
from €322.69
Bellow made of PTFE Made of fluoroplastic with sharp folds allow a very flexible (up to an angle of 120°) and stress-free connection of LV equipment
from €49.32
Sleeves with ribs, PTFE For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the...
from €1.70
Sleeves with gripping ring made of PTFE with gripping ring and sealing rings on the outside high-vacuum tight sealing low leak rate: solid construction for continued use sealing rings are easy accessible and therefore easy to clean
from €5.97
Spherical Ground Joint Sleeves made of PTFE, for gas-, liquid- and vacuum tight spherical joint. The sealing groove on the Spherical Ground Joint Sleeve causes a high vacuum tight seal (low leak rate: Easy soluble and thus multiple...
from €5.97
movable insert with Ground joint made of PTFE Transition from a Ground joint to a glass thread. The body can be turned independently from the screw cap. The completely assembled adaptor can be removed and fixed on another bottle without...
from €44.05
![Ground glass joint clamp, POM, for spherical glass joint Ground glass joint clamp, POM, for spherical glass joint](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
Ground joint clamps made of polyacetal (POM), Delrin®. Melting point 175°C Heat-resistant up to approx. 150°C, very good chemical resistance. Easy, safe and quick to fit and remove. Each size in a different color for easy selection. No...
from €5.05
![Ground joint clamps made of best special Cr-Ni-spring steel wire Ground joint clamps made of best special Cr-Ni-spring steel wire](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
Ground joint clamp (DBGM) for conical standard ground compounds: Made of best special Cr-Ni-spring steel wire, thus very temperature- and chemical-resistant Exact, safe fit even in case of tensile loading Constant elasticity over several...
from €2.80
Magnetic stirrer coupling (G-MRK) Perfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE/PEEK and a conductor made of borosilicate glass. Requires little space due to compact construction. No leakage...
from €1,374.52
Three necks round bottom flask 20000 ml Middle neck NS 45/40 2x side neck NS 29/32 (20° angle) Borosilicate glass 3.3
€923.20
Three necks round bottom flask 20000 ml Middle neck NS 45/40 2x side neck NS 29/32 (straight) According to 12392 Borosilicate glass 3.3
€923.20
DURAN® separating funnel conical shape with NS-cock Tap safety and plastic plugs Due to the conical shape very suitable for phase separation acc. to DIN ISO 4800
from €74.49