Top seller
No results were found for the filter!
With side PTFE valve 0 - 3 mm and hose connection 8 mm Borosilicate glass 3.3
from €72.92
Four necked flask (reaction flask) With tempering jacket Middle neck NS 29/32 2x side necks NS 29/32 1x side neck NS 14,5/23 Side necks at 7° angle to body Bottom run-off valve 0 - 10 mm Borosilicate glass 3.3
from €1,162.46
Two-piece cooling trap Material: borosilicate glass 3.3
from €132.15
Two-piece cooling trap Material: borosilicate glass 3.3
from €157.38
Two-piece cooling trap Lower section removable, complete unit Suitable for use in vacuum conditions Made of borosilicate glass 3.3 For fitting to high vacuum leads, metal flange components and similar
from €468.54
Dropping funnel Cylindrical Drain tube with cone NS 14,5/23 and dropping point Socket NS 14,5/23 Stopcock NS 12,5 Made of borosilicate glass 3.3 With graduation Approximate readings of sub-volumes With PTFE plug with standard ground...
from €81.09
With deferred glass jacket For easy fractionation Made of DURAN®
from €112.71
Bredt-type distilling receiver Inclined receiver with socket NS 14/23 and cone NS 14/23 Distributor with socket NS 14/23 and 4x cone NS 14/23 4x flasks socket NS 14/23 4x flasks 25 ml Included clamps DURAN® b orosilicate glass 3.3
from €234.27
DURAN® reaction vessel Made of borosilicate glass 3.3 With temperature stabilizing jacket Cylindrical Outer bottom flat Inner bottom slightly curved Thread GL 80 at top with screwing cap GL 80 (PP) Tangential tempering connections GL 18...
from €507.25
Adapter M 16x1 on hose nozzle Made of stainless steel (acc./Reaction vessel)
from €43.05
High vacuum small flange connection made of glass Also suitable for connection with DIN metal flanges According to DIN 28403 Borosilicate glass 3.3
from €20.80
Screw cap With hose connection (PP) Straight
from €3.73
Suitable for reaction vessels up to 6 liters in volume Complete with tripod (pipe diameter 25 mm) for attaching stirres, etc. Completely made of 18/8 steel LxWxH 550 x 550 x 1130 mm
from €1,121.30
Suitable for reaction vessels up to 6 liters in volume With 4 steering rollers, brakes Complete with stand (tube diameter 25 mm) for fitting stirres, etc. Open at front bottom (to put in collecting vessels) Completely made of 18/8 steel...
from €1,305.96
Vacuum distributor With 3-5 PTFE high-vacuum valves Made of borosilicate glass 3.3 Passage 0 to 6 mm With hose connectors
from €430.81
Erlenmeyer flask Made of fluoroplastic/PTFE With standard ground joint Thicked-walled suitable for vacuum
from €134.10
Two neck-cut round-bottomed flask PFA Made of fluoroplastic, non-porous With central center- and lateral ground joint necks for insertion of thermocouples, electrodes or hoses Conditionally vacuum suitable, e.g. at 30 mbar and a...
from €400.36
Three-neck round bottom flask ground PFA Made of fluoroplastic, non-porous With central center- and lateral ground joint necks for insertion of thermocouples, electrodes or hoses Conditionally vacuum suitable, e.g. at 30 mbar and a...
from €563.43
Round bottom flask PFA Transparent Can be used as a safety flask for rotary evaporators High temperature and chemical resistance
from €94.63