Top seller
No results were found for the filter!
![Keys for stopcocks with 3 grooves PTFE Keys for stopcocks with 3 grooves PTFE](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
• Three grooves PTFE • Double oblique 2.5 mm • 3-Part retaining device
from €20.19
![PTFE-keys, Taper 1:5 PTFE-keys, Taper 1:5](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
• With thread • Complete with 3 part retaining device • Keys made of PFTE
from €10.30
DURAN® borosilicate glass Very good chemical resistance High temperature resistance Minimal thermal expansion giving relatively high resistance to temperature changes Round bottom cylinders
from €51.24
![DURAN® Reduction Adapter DURAN® Reduction Adapter](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
DURAN®, borosilicate glass 3.3. Outstanding leak tightness Minimal requirement for joint lubrication Joints cannot be misaligned Reduction adapter from large cone to small socket DIN 12257
from €21.24
![DURAN® Expansion Adapter DURAN® Expansion Adapter](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
DURAN®, borosilicate glass 3.3, clear. Very good chemical resistance High temperature resistance Minimal thermal expansion giving relatively high resistance to temperature changes Expansion adapter from small cone to large socket
from €16.14
Consisting of PTFE body with connecting nut and two lateral GL 18 threaded necks. a FEP inlet tube with a length of 300 mm and a gas distributor with finest bores Easy in- and outlet of gas by means of hard-walled tubing (e.g. PTFE)...
from €138.93
Bubble counter for monitoring the flow rate of gases made of borosilicate glass 3.3
from €41.38
Recommended as a safety accessory to monitor gas reactions and reactions that produce gases. Easy filling and emptying, easy to clean. Compact design, handy size. Built-in back-up protection. Operation at overpressure and underpressure....
€165.00
As a pressure relief valve is a spring-loaded ball joint, a higher-viscosity barrier liquid ensures the tightness. The spring pressure is adjustable, but the valve can be delivered pre-set and sealed upon request. Maximum overpressure...
from €265.65
Fork-type clamp for conical joint CrNi steel without locking screw
from €15.24
Clamp for spherical joints for KS 13 made of 18/8 steel with locking screw
from €11.79
![KPG stirrer bearing with stirrer head KPG stirrer bearing with stirrer head](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
KPG stirrer bearing with stirrer head Made of DURAN® 50 10 mm nominal diameter
from €67.50
![KPG stirrer bearing with stirrer head with cooling jacket KPG stirrer bearing with stirrer head with cooling jacket](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
KPG stirrer bearing with stirrer head With cooling jacket Made of DURAN® 50 10 mm nominal diameter
from €83.00
![KPG stirrer bearing with stirrer head with cooling jacket and gas inlet KPG stirrer bearing with stirrer head with cooling jacket and gas inlet](/themes/Frontend/Fleischhacker/frontend/_public/src/img/no-picture.jpg)
KPG stirrer bearing with stirrer head With cooling jacket and gas inlet Head NS 29 Made of DURAN® 50 10 mm nominal diameter
from €112.10
Globe stirrer coupling Made of POM, a plastic material with a good mechanical strength Powerful transmission of up to 300 Ncm Suitable for a speed of up to 1.200 rounds per minute Maximum misalignment of axes 10 mm Product advantages:...
from €126.20
Magnetic stirrer coupling (P-MRK) Ideal stirrer head for PTFE-jacketed stirrer shafts from BOLA. Consisting of capsuled drive shaft (stainless steel) with ball bearings, rotor and lower bearing made of PEEK-Compound and a borosilicate...
from €1,073.22
Nitrogen round bottom flasks With side straight stopcock 2.5 mm and hose connection 9 mm Borosilicate glass 3.3
from €63.15