Top seller
WESTMED ® NitrilGuard examination gloves, extra... Content 100 piece(s) (€0.04 / 1 piece(s))
from €3.95
No results were found for the filter!
Quick change chuck for EPPI micropistill Helps to easily change the pestle while the engine is running using homogenizer drives (chuck with 8 mm tension). Increases productivity, no contamination in sample series.
€55.00
UP100H Ultrasonic Homogenizer Set The ultrasonic processor UP100H (100W, 30kHz) is the perfect device for sonicating small and medium-sized laboratory samples. This compact yet powerful laboratory homogenizer is used to prepare the samples: emulsification and dispersion,...
€3,900.00
S 10 N - 5 G Dispersing element Technical... Fully digital laboratory dispersing unit. Equipped with a completely new control and regulation system and a new operating concept with membrane keyboard and informative LCD display as well as a PC interface with the new free KINEMATICA...
€1,527.00
S 10 N - 8 G Dispersing element Technical... Dispersing tool for drive T 10 basic and T 10 standard Working range: 1 - 50 ml Diameter stator: 8 mm Immersion depth: 20 - 95 mm Materials in contact with product: PTFE, AISI 316L Suitable for solvents: yes Temperature range: up to...
€1,527.00
S 10 N - 10 G Dispersing element Technical... Dispersing tool for drive T 10 basic and T 10 standard Working range: 1 - 100 ml Stator diameter: 10 mm Immersion depth: 20 - 100 mm Materials in contact with product: PTFE, AISI 316L Suitable for solvents: yes Temperature range: up to...
€1,527.00
S 18 D - 10 G - KS Dispersing element (12 pcs)... Incl. a disposable tube Working range: 10 - 100 ml Stator diameter: 10 mm Rotor diameter: 6.75 mm Min./max. immersion depth: 15/85 mm Installation length: 150 mm Product wetted materials: Polycarbonate, Polyetheretherketone (FDA...
Content 10 piece(s) (€32.80 / 1 piece(s))
€328.00
S 18 D - 14 G - KS Dispersing element (12 pcs)... Incl. a disposable tube Working range: 10 - 500 ml Diameter stator: 14 mm Rotor diameter: 9.5 mm Min./max. Immersion depth: 15/85 mm Installation length: 150 mm Product wetted materials: Polycarbonate, Polyetheretherketone (FDA approved)...
Content 10 piece(s) (€32.80 / 1 piece(s))
€328.00
Dispersing tool for T 25, S 25 N - 8 G Dispersing tool for drive T 25 digital For quantities from 1.0 - 50 ml. Stator diameter: 8 mm Immersion depth: 27 - 85 mm Shaft mounted in PTFE slot ring bearing, suitable for solvents, sterilizable, short-term working temperature up to...
€1,816.00
Dispersing tool for T 25, S 25 N - 10 G Dispersing tool for drive T 25 digital for quantities from 1 - 100 ml. Stator diameter: 10 mm Immersion depth: 22 - 85 mm Shaft mounted in PTFE slot ring bearing suitable for solvents sterilizable short-term working temperature up to 180°C.
€1,362.00
Dispergierwerkzeug für T 25, S 25 N - 18 G Dispersing tool for drive T 25 digital for quantities from 10 - 1500 ml Stator diameter: 18 mm Immersion depth 40 - 165 mm Shaft with PTFE slot ring bearing mounted Suitable for solvents Sterilizable Short-term working temperature up to...
€1,362.00
Dispersing tool for T 25, S 25 N - 25 G Dispersing tool for drive T 25 digital For quantities from 50 - 2000 ml. Stator diameter: 25 mm Immersion depth: 40 - 165 mm. Shaft with PTFE slot ring bearing, suitable for solvents, sterilizable, short-term working temperature up to...
€1,741.00
Dispersing tool for T 25, S 25 N - 25 F Dispersing tool for drive T 25 digital For quantities from 100 - 2000 ml Stator diameter: 25 mm Immersion depth: 40 - 185 mm Shaft with PTFE slot ring bearing, suitable for solvents, sterilizable, short-term working temperature up to...
€1,839.00
Plastic dispersing tool for T 25, S 25 D - 10 G... Incl. a disposable tube Working range: 10 - 100 ml Stator diameter: 10 mm Rotor diameter: 6.75 mm Min./max. immersion depth: 15/85 mm Installation length: 150 mm Product wetted materials: Polycarbonate, Polyetheretherketone (FDA...
Content 10 piece(s) (€32.80 / 1 piece(s))
€328.00
S 25 D - 14 G - KS Dispersing element (12 pcs)... Incl. a disposable tube Working range: 10 - 500 ml Diameter stator: 14 mm Rotor diameter: 9.5 mm Min./max. immersion depth: 15/85 mm Installation length: 150 mm Product wetted materials: Polycarbonate, Polyetheretherketone (FDA approved)...
Content 10 piece(s) (€32.80 / 1 piece(s))
€328.00
PT-DA 03/2EC-E050 Standard dispersing unit with two sprockets, made of 316L stainless steel, for all standard applications in sample preparation and formulation development. The saw teeth on the head optimizes the pre-shredding of the sample. These teeth...
€1,434.00
PT-DA 05/2EC-E085 Standard dispersing unit with two sprockets, made of 316L stainless steel, for all standard applications in sample preparation and formulation development. The saw teeth on the head optimizes the pre-shredding of the sample. These teeth...
€1,521.00
PT-DA 07/2EC-E107 Standard dispersing unit with two sprockets, made of 316L stainless steel, for all standard applications in sample preparation and formulation development. The saw teeth on the head optimizes the pre-shredding of the sample. These teeth...
€1,595.00
PT-DA 07/2SYN-E082 Disposable aggregate made of materials PES / special POM Volume 0.3 - 10 ml Diameter 7 mm Length 82 mm Max. underground 7 m / s
Content 25 piece(s) (€31.56 / 1 piece(s))
€789.00
PT-DA 20/2EC-E192 Standard Dispergier aggregate with two gear rims, from high-grade steel 316 l, for all current applications in the test preparation and in the recipe development. Prechopping up the test is optimised by the saw teeth right in the head....
€1,707.00
PT-DA 20/2MEC-E192 Dispersing unit with external blades, made of stainless steel 316L, for all common applications in sample preparation and recipe development. Samples larger than are the rotor diameter, are pre-comminuted and then dispersed in the...
€1,858.00
PT-DA 20/2WEC-E192 Disperser-aggregate in "W" of design, from high-grade steel 316 l, for all current applications in the test preparation and in the recipe development. Fibrous, wiry or hard test cannot block by the W design the aggregate. Volume 100 -...
€2,085.00
PT-DA 20/2XEC-E116 Disperser aggregate in "X" design, from high-grade steel 316 l. To block special geometry for the despersing of tabloids & the pills or Suppositorien without or to close. Volume min. 10 ml Diameter 12 mm Length 192 mm Max. UG 21 m/s UG...
€2,021.00