Top seller
WESTMED ® NitrilGuard examination gloves, extra... Content 100 piece(s) (€0.04 / 1 piece(s))
from €3.95
No results were found for the filter!
Replacement shaft Guides PTFE/FPM, PTFE/FKM,... With integrated, exchangeable special gasket made of PTFE and an FKM o-ring., dimensions: For stirrer shaft dia. mm 8, Total length mm 57
from €19.60
Impeller stirrer shaft, PTFE Impeller stirrer shaft PTFE-jacketed stainless steel shaft Impeller completely made of PTFE with three blades bent backwards Lower side of impeller either even or 15° angled Universal chemical resistance since the product is only exposed...
from €322.69
Bellows PTFE, NS14/23 Bellow made of PTFE Made of fluoroplastic with sharp folds allow a very flexible (up to an angle of 120°) and stress-free connection of LV equipment
from €49.32
Sleeves with Ribs PTFE, PTFE Sleeves with ribs, PTFE For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the...
from €1.70
Sleeves with Gripping Ring, PTFE, reusable Sleeves with gripping ring made of PTFE with gripping ring and sealing rings on the outside high-vacuum tight sealing low leak rate: solid construction for continued use sealing rings are easy accessible and therefore easy to clean
from €5.97
Spherical Ground Joint Sleeves PTFE Spherical Ground Joint Sleeves made of PTFE, for gas-, liquid- and vacuum tight spherical joint. The sealing groove on the Spherical Ground Joint Sleeve causes a high vacuum tight seal (low leak rate: Easy soluble and thus multiple...
from €5.97
Ground joint GL adaptors PTFE/PPS movable insert with Ground joint made of PTFE Transition from a Ground joint to a glass thread. The body can be turned independently from the screw cap. The completely assembled adaptor can be removed and fixed on another bottle without...
from €44.05
Ground joint clamps made of best special... Ground joint clamp (DBGM) for conical standard ground compounds: Made of best special Cr-Ni-spring steel wire, thus very temperature- and chemical-resistant Exact, safe fit even in case of tensile loading Constant elasticity over several...
from €2.80
Chaney adapter Chaney adapter For microliter syringes of series 700, 1700, 7000 Dosage dispenser made of steel/aluminium Syringe not included Cannula gauge 22 S
€119.07
Stainless steel barrel pump with discharge tube Stainless steel barrel pump with discharge tube The Bürkle drum pump made of stainless steel is suitable for filling flammable and easily flammable liquids. The pump is electrically conductive and therefore, in conjunction with the...
from €266.35
Stainless steel barrel pump with hose Stainless steel barrel pump with hose The Bürkle drum pump made of stainless steel is suitable for filling flammable and easily flammable liquids. The pump is electrically conductive and therefore, in conjunction with the antistatic set,...
from €433.90
Solvent pump for foot operation Solvent pump for foot operation with discharge tube For filling of high purity liquids. All medium-contacting parts are made of stainless steel and PTFE. Due to the barrel screw joint and the stopcock, the container and the pump can be...
from €556.90
PP barrel pump with discharge tube PP barrel pump With rigid discharge tube Allows a fast transfer of liquids from barrels, canisters and tanks. The good chemical resistance of PP allows acids, alkalis and aggressive detergents to be transferred. The low-mounted...
from €159.55
PP barrel pump with discharge hose/stopcock PP barrel pump With flexible discharge hose made of PVC (length 1.2 m) and stopcock Allows a fast transfer of liquids from barrels, canisters and tanks. The good chemical resistance of PP allows acids, alkalis and aggressive detergents...
from €159.55
Gas-tight barrel pump PP Gas-tight barrel pump PP With universal adapter Enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced...
from €297.50
Cordless pump for acids and caustic solutions, PP Cordless pump for acids and caustic solutions, PP Suction pipe Ø: approx. 25 mm Material: PP Temperature resistance: +5 to +60°C Chemical resistance: ++ very good Product description: Made of polypropylene, PTFE, Hastelloy®, driven by...
from €418.03
MicroDispo LaboPlast MikroDispo, disposable sample collector for flowable bulk materials up to 0.5 mm grain size. Disposable product - unpack, take sample, recycle! No contamination with other samples. No time-consuming, time-consuming, expensive cleaning....
Content 20 piece(s) (€8.04 / 1 piece(s))
from €160.75
ViscoSampler (made of PP) ViscoSampler: the ultrapure sample collector for viscous substances. With the strong suction power for viscous media. With the suction piston, the medium is sucked in and ejected again. Specially developed for viscous substances such as...
from €343.10
ViscoSampler (made of PTFE) ViscoSampler: the ultrapure sample collector for viscous substances. With the strong suction power for viscous media. With the suction piston, the medium is sucked in and ejected again. Made of ultra-pure and chemically inert PTFE / FEP...
from €450.85
LiquiSampler (made of PP) LiquiSampler: the ultrapure sample collector for liquids. For liquids, according to DIN 53 242. Made of ultra-pure and chemically inert PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos,...
from €250.20
LiquiSampler PTFE LiquiSampler: the ultrapure sample collector for liquids. For liquids, according to DIN 53 242. Made of ultra-pure and chemically inert PTFE / FEP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks,...
from €395.55