Top seller
No results were found for the filter!
Dissolver stirrer R 1300 Dissolver agitator welded at angled offset for improved flow. Radial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds....
€331.00
Propeller stirrer R 1345, 4-bladed Standard stirring element. For drawing the material to be mixed from the bottom to the top. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Material in contact with medium: AISI 316L/1.4571....
€229.00
Propeller stirrer R 1389, 3-bladed, PTFE coated PTFE-coated stirring element, 3-blade. For drawing the material to be mixed from top to bottom. Local shear forces. Generates an axial flow in the vessel. For use at medium to high speeds. A stainless steel core is visible at the top and...
€673.00
Propeller stirrer R 1382, 3-bladed Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 350 mm Shaft diameter: 8 mm...
€389.00
Dissolver stirrer R 1302 Radial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 350...
€694.00
Dissolver R 1402, working range 1 - 30 L,rotor... The R 1402 dissolver head is designed for the use with the overhead stirrers EUROSTAR 20 high speed digital / control and the high speed stirring shaft R 50 of the disperser T 50 digital. It is ideally suited for applications which work...
€357.00
Propeller R 1405, working range 0.25 - 30 L,... The R 1405 propeller head is designed for the use with the overhead stirrers EUROSTAR 20 high speed digital / control. It can also be used as an alternative mixing head to the R 1402 dissolver head on the high speed stirring shaft R 50...
€260.00
Spiral stirrer R 3003.1 Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneous mixing and heat exchange of medium to high viscosity media. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length:...
€597.00
Anchor stirrer R 1333 Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids....
€932.00
Turbine stirrer R 1313 For drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high speeds. Material in contact with medium: AISI...
€392.00
Centrifugal stirrer R 1352 Two-bladed, blades open with increasing speed. For stirring in round vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.. Material in contact with medium: AISI 316L/AISI...
€210.00
Paddle stirrer R 1376 Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 550 mm Shaft diameter: 10 mm Stirrer diameter: 150 mm...
€444.00
Propeller stirrer R 1385, 3-bladed Flow-efficient design. For drawing the material to be mixed from the bottom to the top. Minimum shearing forces. Used at medium to high speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 550 mm Shaft diameter: 10 mm...
€373.00
Anchor stirrer R 1331 Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids....
€573.00
Spiral stirrer R 3003.2 Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneous mixing and heat exchange of medium to high viscosity media. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length:...
€764.00
Propeller stirrer type R 1388, 3-blade Streamlined shape. Suction of the mix from bottom to top, low shear forces. For use at medium to high speeds. Shaft length: 800 mm, Shaft diameter: 10 mm, Stirrer diameter: 140 mm
Content 1 piece(s)
€444.00
Stainless steel sensor H 62.51 Replacement sensor for ETS-D5 and ETS-D6 Immersion depth 230 mm Diameter 3 mm Length 260 mm Material AISI 316 Ti
€245.00
Propeller stirrer Type R 1381 Flow-optimised shape. Suction of the mix from above and below, low shear forces. For use at medium to high speeds. 3-bladed Shaft length: 350 mm Shaft diameter: 8 mm Stirrer diameter: 45 mm.
€373.00
Centrifugal stirrer-R 1355 2-wing, the wings open as the speed increases. For stirring in bulbous vessels with a narrow neck. Effect similar to propeller stirrer, 4 blades. Medium to high speeds required. Wavelength: 550mm Shaft diameter: 8mm Stirrer diameter:...
€279.00
FK 1 Flexible coupling For stirring tasks in glass apparatus with KPG stirrers, to compensate for inaccuracies in construction. Clamping range: 6 – 10 mm Max. torque: 10 Ncm
€377.00
Stirring shaft protection type R 301 Prevents potential injuries at the rotating shafts and stirring elements. It can be directly attached to the stirring motors RW 20 digital, RW 28 digital and the EUROSTAR series overhead stirrer. R 301.1 support holder is required to fix...
€224.00
