Stirrer EUROSTAR 200 control P4

Stirrer EUROSTAR 200 control P4

Extremely powerful agitator for highly viscous media for quantities up to 100 L (H2O). With removable remote control and digital TFT display. A microprocessor-controlled regulation keeps the speed set between 0/4 - 530 min-1 (two speed ranges) constant. The RS 232 and USB interface of the stirrer allow the control and documentation of all parameters. An integrated torque trend display provides information about viscosity changes. An electronic safety circuit guarantees that the unit is switched off in the event of a fault or overload. Setpoint and actual speed are continuously adjusted. Thus the speed remains constant even if the viscosity of the medium changes.
- Multilingual TFT display
- Programmable functions
- Integrated temperature measurement
- Interval operation
- Time switch
- Adjustable safety circuit
- Locking function
- Infinitely variable speeds
- Overload protection
- Short term overload operation
- Slim design
- High running smoothness
- Error code display

Technical data:
Stirring quantity max. per stirring point (H2O) [l]: 100
Motor power input [W]: 134
Motor power output [W]: 76
Motor principle: Brushless direct current
Speed display: TFT
Speed range [rpm]: 0/4 - 530
Direction of rotation reversible: no
Intermittent operation: yes
Viscosity max. [mPas]: 150000
Max. power at the agitator shaft [W]: 76
Permissible duty cycle [%]: 100
Max. torque at the agitator shaft [Ncm]: 660
Torque I max. [Ncm]: 660
Torque II max. [Ncm]: 130
Speed range I (50 Hz) [rpm]: 4 - 108
Speed range II (50 Hz) [rpm]: 16 - 530
Speed range I (60 Hz) [rpm]: 4 - 108
Speed range II (60 Hz) [rpm]: 16 - 530
Speed adjustment option: Stepless
Setting accuracy speed [±rpm]: 1
Speed measurement deviation n > 300rpm [±%]: 1
Speed measurement deviation n < 300rpm [±rpm]: 3
Stirring tool attachment: Chuck
Connection for external temperature sensor: PT1000
Temperature display: yes
Chuck clamping range min. diameter [mm]: 0.5
Chuck clamping range max. diameter [mm]: 10
Hollow shaft (insertable - at standstill): no
Mounting on the tripod: Extension arm
Boom diameter [mm]: 16
Jib length [mm]: 220
Torque display: yes
Nominal torque [Nm]: 6.6
Torque measurement: Trend
Torque measurement deviation I [±Ncm]: 60
Torque measurement deviation II [±Ncm]: 10
Time switch: yes
Display timer: TFT
Time setting range [min]: 1 - 6000
Measuring range temperature min. [°C]: -10
Measuring range Temperature max. [°C]: +350
Temperature measurement resolution [K]: 0.1
Measuring accuracy temperature [K]: ±0.5 + tolerance PT1000 (DIN IEC 751 class A)
Temperature sensor limiting error [K]: ? ± (0.15 + 0.002xITI)
Housing material: cast aluminium coated / thermoplastic
Clean room suitable: no
Explosion-proof: no
Communication range (depending on building) max. [m]: 150
Dimensions (W x H x D) [mm]: 91 x 379 x 231
Weight [kg]: 5.8
Permissible ambient temperature range [°C]: 5 - 40
Permissible relative humidity [%]: 80
Protection class according to DIN EN 60529: IP 40
USB interface: yes
RS 232 interface: yes
Analog output: no
Voltage [V]: 230
Frequency [Hz]: 50/60
Device power consumption [W]: 134