Top seller
No results were found for the filter!
Paddle stirrer R 1376 Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 550 mm Shaft diameter: 10 mm Stirrer diameter: 150 mm...
€444.00
Temperature sensor H 67.60 PT 1000 temperature sensor, made of stainless steel, for use with EUROSTAR, MINISTAR and MICROSTAR control overhead stirrer. Max. depth of immersion: 230 mm Diameter: 3 mm Material: AlSI 316 Ti Max. temperature: 350 °C Response time:...
€183.00
Temperature sensor H 68.55 PT 1000 temperature sensor, made of stainless steel, for use with EUROSTAR, MINISTAR and MICROSTAR control overhead stirrer. Suitable for highly viscous samples or in combination with LR 2000.60 receptacle at LR 2.ST. Max. depth of...
€343.00
Propeller stirrer R 1385, 3-bladed Flow-efficient design. For drawing the material to be mixed from the bottom to the top. Minimum shearing forces. Used at medium to high speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 550 mm Shaft diameter: 10 mm...
€373.00
Anchor stirrer R 1331 Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids....
€573.00
Spiral stirrer R 3003.2 Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneous mixing and heat exchange of medium to high viscosity media. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length:...
€764.00
Keyless chuck R 60 Only for use with EUROSTAR 20 / 40 / 60 / 100 / 200 / RW 20, excluding EUROSTAR 20 high speed digital and control. It allows you to quickly and easily remove the stirring elements without any tools. Clamping range: 0.5 – 10 mm
€99.50
Hei-TORQUE Ultimate 200 The Hei-TORQUE Ultimate 200 laboratory stirrer is ideal for the powerful stirring of viscosities up to 100,000 mPas or volumes up to 50 liters (H 2 O). It has a wide speed range (10 - 2,000 rpm) and a maximum torque of 200 Ncm.
€2,497.00
H 135.10 Square carrier without handle Support plate for holding the H 135 blocks. Dimensions W x D x H: 160 x 160 x 32 mm Working temperature: max. 300°C Material: anodized aluminium in contact with the product
€186.00
H 135.11 Square carrier with handle Support plate for holding the H 135 blocks. Dimensions W x D x H: 160 x 160 x 32 mm Working temperature: max. 300°C Material: anodized aluminium in contact with the product
€331.00
Propeller stirrer type R 1388, 3-blade Streamlined shape. Suction of the mix from bottom to top, low shear forces. For use at medium to high speeds. Shaft length: 800 mm, Shaft diameter: 10 mm, Stirrer diameter: 140 mm
Content 1 piece(s)
€444.00
Magnetic stirring bar with blade, PTFE PTFE-encapsulated magnetic core (Alnico 5), tapered blade with fixed cylindrical stirring bar, universal chemical resistance. Perfectly suitable for the use in test tubes or vessels with tapered bottom. Triangular blade for centric...
from €4.29
Stainless steel sensor H 62.51 Replacement sensor for ETS-D5 and ETS-D6 Immersion depth 230 mm Diameter 3 mm Length 260 mm Material AISI 316 Ti
€245.00
Propeller stirrer Type R 1381 Flow-optimised shape. Suction of the mix from above and below, low shear forces. For use at medium to high speeds. 3-bladed Shaft length: 350 mm Shaft diameter: 8 mm Stirrer diameter: 45 mm.
€373.00
Centrifugal stirrer-R 1355 2-wing, the wings open as the speed increases. For stirring in bulbous vessels with a narrow neck. Effect similar to propeller stirrer, 4 blades. Medium to high speeds required. Wavelength: 550mm Shaft diameter: 8mm Stirrer diameter:...
€279.00
Oil bath attachment type H 30, 1,5L The oil bath attachment H 30 can be used as oil baths together with an IKAMAG® magnetic stirrer with heating or with an IKATHERM® heating plate having a diameter of 135 mm. Positioning border prevents sliding on the heating plate Safety...
€315.00
FK 1 Flexible coupling For stirring tasks in glass apparatus with KPG stirrers, to compensate for inaccuracies in construction. Clamping range: 6 – 10 mm Max. torque: 10 Ncm
€377.00
Laboratory stirrer Hei-TORQUE Core The additional name “Core” emphasizes that it is a model of selected functions and important safety features that provide tangible help with any stirring task. Above all, the Hei-TORQUE Core scores with its simple operation: The...
€999.00
Nanostar 7.5 digital] The overhead stirrer NANOSTAR 7.5 digital is 30 % smaller than the MICROSTAR 7.5 digital and therefore even more space-saving. However, its performance remains the same. NANOSTAR 7.5 digital convinces with perfect basic functionalities,...
€1,006.00
Stirring shaft protection type R 301 Prevents potential injuries at the rotating shafts and stirring elements. It can be directly attached to the stirring motors RW 20 digital, RW 28 digital and the EUROSTAR series overhead stirrer. R 301.1 support holder is required to fix...
€224.00
Magnetic stirrer 2mag - MIX 1 Designed for chemical, biotechnical and medical applications of all kinds, developed for the hard daily lab use and uncompromising continuous operation. Ultra flat, wear-free magnetic stirrer with 1 large stirring position, up to 10,000...
€741.00