Top seller
No results were found for the filter!
Magnetic stirring bar remover, length 250 mm,... With a length of 50 mm, this magnetic rod remover is specially designed to be used effectively even in smaller vessels and confined working areas. The magnetic rod remover is equipped with a strong magnet that makes it possible to safely...
Content 1 piece(s)
€26.90
Magnetic stirring bar, 38 mm, cross shaped The 38 x 38 mm cross-shaped magnetic stirring rod is a specially developed laboratory tool designed for efficient and thorough mixing of liquids. With its dimensions of 38 mm x 38 mm, this stirring rod offers a larger surface area for...
Content 1 piece(s)
€24.60
Magnetic stirring bar, 25.4 x 9.5 mm, octagonal... Octagonal magnetic stirring bars with centre ring. High turbulence due to the angular surface ensures efficient and even mixing of liquids, even with highly viscous media. The centre ring ensures optimum balance when turning,...
Content 1 piece(s)
€5.01
Magnetic stirring bar, cylindrical, PTFE The magnetic stirring rod is a high-quality and reliable tool for laboratory applications where effective and uniform mixing of liquids is required. With a length of 40 mm and a diameter of 8 mm, this stirring rod is particularly...
Content 1 piece(s)
from €3.42
Magnetic stirring rods, 52 mm, dumbbell-shaped,... The dumbbell-shaped form of the stirring rod ensures particularly efficient swirling of the liquid. This special geometry promotes uniform mixing and prevents particles from sticking to the walls of the vessel, resulting in consistent...
Content 1 piece(s)
€15.07
Spiral stirrer R 3003.1 Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneous mixing and heat exchange of medium to high viscosity media. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length:...
€585.00
Anchor stirrer R 1333 Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids....
€913.00
Turbine stirrer R 1313 For drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high speeds. Material in contact with medium: AISI...
€384.00
Centrifugal stirrer R 1352 Two-bladed, blades open with increasing speed. For stirring in round vessels with narrow necks. Effect is similar to that of a 4-bladed propeller stirrer. Medium to high speeds required.. Material in contact with medium: AISI 316L/AISI...
€154.00
Paddle stirrer R 1376 Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 550 mm Shaft diameter: 10 mm Stirrer diameter: 150 mm...
€435.00
Propeller stirrer R 1385, 3-bladed Flow-efficient design. For drawing the material to be mixed from the bottom to the top. Minimum shearing forces. Used at medium to high speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length: 550 mm Shaft diameter: 10 mm...
€365.00
Anchor stirrer R 1331 Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer for medium to highly viscous fluids....
€561.00
Spiral stirrer R 3003.2 Generates axial flow. Medium is conveyed from the bottom upwards. For homogeneous mixing and heat exchange of medium to high viscosity media. Used at low to medium speeds. Material in contact with medium: AISI 316L/1.4571. Shaft length:...
€749.00