Top seller
No results were found for the filter!
Multi-purpose heating bath PZ 26-7, up to 700°C PZ 26-7 is suitable as liquid, air, sand bath up to 400 ° C. As a bath filling, oils, water, sand or other bath fillings, which can be made of stainless steel W no. 1.4301 existing bath tanks do not attack. PZ 26-7 for temperatures up to...
€1,450.00
Precision heating bath PZ 26-4, up to 400 ° C The heating bath PZ 26-4 is suitable as liquid, air, sand bath up to 400 ° C. As a bath filling, oils, water, sand or other bath fillings, which are made of stainless steel W no. 1.4301 existing bath tanks do not attack. The heating is...
€1,421.00
Heating platform, CERAN 500®, Type CT 10, 1200... High-duty hot plate with round heating panel 145 mm in dia., stainless steel housing, controlled by power controller from 10 to 100%, built-in temperature monitor, for temperatures up to 500°C, Type CT 10. Technical specifications:...
€488.00
Program controller, type PR 5-3T The microprocessor-controlled ramp controller is a complex time / temperature control for the high-temperature heating plate.Pressing the START button, a program set of up to 5 ramps can be executed, with a maximum of 5 ramps (one ramp...
€2,491.00
Temperature controller, type TR 28-3T The microprocessor-controlled temperature controller TR 28-3T is a temperature controller for the high-temperature heating plate. After setting the temperature value via the keypad, this temperature is kept constant by the PID...
€1,037.00
High-performance hot plates made of Titanium,... High-performance hot plates for temperatures up to 600°C, with a very short heating-up time (600°C in 20 minutes). The extremely efficient insulation allows the appliance to also be used on working surfaces which are not heat-resistant....
from €1,925.00
Precision hot plate to 450'C type PZ 44 Hot plates with microprocessor control of temperatures from room temperature up to 450°C. The electric heater has 3 power levels (825 – 1650 – 3300 W.) Each level can also be adapted by electronic power outputs in the range from 10 to...
from €2,479.00
Rapid incinerator SVD 95/P with digital temp.... The operating temperature of about 950 ° C is reached in a few minutes after switching on. The upper floor with 8 holes each 34 mm diameter takes porcelain crucible to max. 50 mm diameter for drying, preheating and burning also liquid...
€2,492.00
Rapid incinerator SVR/E with temp. Regulator The operating temperature of about 950 ° C is reached in a few minutes after switching on. The upper floor with 8 holes each 34 mm diameter takes porcelain crucible to max. 50 mm diameter for drying, preheating and burning also liquid...
€1,792.00
Rapid incinerator SV/II, without temp. Control The operating temperature of about 950 ° C is reached in a few minutes after switching on. The upper floor with 8 holes each 34 mm diameter takes porcelain crucible to max. 50 mm diameter for drying, preheating and burning also liquid...
€1,255.00
Temperature test chamber TTC256 Temperature test chamber TTC256 The temperature test chamber TTC 256 simulates the perfect atmosphere in accordance with the standard and shortens processes by rapid temperature changes. Features: Ventilation and control technology:...
€23,599.00
Bunsen burner, DIN 30655, with air regulation DIN burners with air regulation cannot be switched off completely in accordance with standard 30665. Therefore a small flame continues to burn even when the gas tap or needle valve is closed. The gas supply must be shut off at the...
€28.45
Stainless steel grid, standard equipment, for... Stainless steel grid, standard equipment, for all models of size 30.
€64.00
Temperature controller 2860 EB, for installation The microprocessor-controlled temperature controller 2860 EB is the temperature control for the precision heating plates. After setting the setpoint value via the keyboard keypad, this is kept constant by the controller. Technical...
€1,091.00
Precision Hot Plates for continuous operation... Heating plate for use as a built-in or bench unit. Asymmetric, reaction-fast special long-term heating and heat sensors as well as performance adjustment to the heat demand precise temperatures with very good uniform temperature on the...
from €617.00
Temperature controller 2860 SR, table unit The microprocessor-controlled temperature controller 2860 SR is the temperature control for the precision heating plates. After setting the setpoint value via the keyboard keypad, this is kept constant by the controller. Technical...
€1,091.00
Cartridge burner with safety element, DIN type Cartridge burner with ignition fuse with air regulation and needle valve T=1650°C Incl. 400 mL cartridge Tribrach recommendation: 5136/5146 For protection against uncontrolled leakage of gas in the laboratory. An electrical voltage is...
€106.55
High temperature burner for cartridge High temperature burner for Usbeck cartridge with piezo ignition and needle valve T=1600°C
€53.90
Micro Burner for cartridge Micro burner for Usbeck cartridge with piezo ignition, air regulation and needle valve. T=1640°C
€44.05
Bunsen burner for cartridge Bunsen burner for Usbeck cartridge with air regulation and needle valve. T=1640°C
€44.20
Teclu burner for cartridge Teclub burner for Usbeck cartridge and air regulation and needle valve. T=1640°C
€48.40
Meker burner bottle gas Meker burner propane/ bottle gas with air regulation and needle valve tube Ø 28 mm and head Ø 32 mm
€72.90
Meker burner natural gas, needle valve Mekerbrenner Erdgas Mit Luftregulierung und Nadelventil Rohr Ø 28 mm und Kopf Ø 32 mm
€72.90