Top seller
No results were found for the filter!
Secura® 26-1S microbalance, 21 g : 0.002 mg Fully automatic internal calibration function isoCAL for the highest possible accuracy at all times Cal Audit Trail for simple, traceable documentation of all calibration and adjustment processes Traceability of all weighing data thanks...
€24,300.00
Cell culture flask T-75, standard surface, red... Cell culture flask T-75 made of polystyrene with PE filter cap Surface: standard Cell type: adherent cells Growth area: 74.2 cm² Working volume: 21 - 55 mL TC-tested gamma-irridiated packed in 5 pieces
Content 100 piece(s)
€108.08
Cubis® II MCA524S-2S00-I QP99, 520 g : 0.1 mg,... Cubis® II MCA balance with large high end 7” color TFT touch display in 16:9 format with new user interface. Actual scale division (d) 0,1 mg, nominal maximum load (Max) 520g. Standard version non-verified, all units. Automatic, glass...
€19,170.00
Screw cap tube, 25 mL, 90 x 25 mm, PP,... Screw tube with skirted conical base. Made of PP with assembled cap made of white HDPE. Max. 4500 x g.
Content 500 piece(s)
€90.56
Cubis® II MCE5203P-2S00-E, 1.200 / 2.400 /... Cubis® II MCE balance with state of the art TFT touch screen operation with brilliant, readable, display but uncomplex, easy to operate user interface. Actual scale division (d) 1 /2 / 5 mg, nominal maximum load (Max) 1.200 / 2.400 /...
€11,477.00
Silikat insulated heating tape MIL-HT-H, 2 m,... Silicate-insulated heating cable up to 900°C High operating temperatures High performance Wide-area heat transfer Highly flexible Not moisture-proof No protective braid
€411.00
H 135.104 Block, 4 x 20 mL Attachment for vessels/tubes with flat bottom. Volume: 20 mL Number of holes: 4 Hole diameter and depth: 28.5 x 23.5 mm Hole shape: cylindrical Dimensions W x D x H: 79 x 79 x 25 mm Working temperature: max. 300°C Material: anodized...
€89.50
H 135.105 Block, 4 x 30 mL Attachment for vessels/tubes with flat bottom. Volume: 30 mL Number of holes: 4 Hole diameter and depth: 28.5 x 33.5 mm Hole shape: cylindrical Dimensions W x D x H: 79 x 79 x 35 mm Working temperature: max. 300°C Material: anodized...
€89.50
H 135.103 Block, 9 x 16 mL Attachment for vessels/tubes with flat bottom. Volume: 16 mL Number of holes: 9 Hole diameter and depth: 20.5 x 28.5 mm Hole shape: cylindrical Dimensions W x D x H: 79 x 79 x 20 mm Working temperature: max. 300°C Material: anodized...
€89.50
H 135.101 Block, 16 x 4 mL Attachment for vessels/tubes with flat bottom. Volume: 4 mL Number of holes: 16 Hole diameter and depth: 15.2 x 18.5 mm Hole shape: cylindrical Dimensions W x D x H: 79 x 79 x 20 mm Working temperature: max. 300°C Material: anodized...
€89.50
H 135.102 Block, 16 x 8 mL Attachment for vessels/tubes with flat bottom. Volume: 8 mL Number of holes: 16 Hole diameter and depth: 17.5 x 23.5 mm Hole shape: cylindrical Dimensions W x D x H: 79 x 79 x 25 mm Working temperature: max. 300°C Material: anodized...
€89.50
H 135.108 Block, 1 x 250 mL Attachment for round bottom flasks. Volume: 250 mL Number of holes: 1 Hole diameter and depth: 86 x 31.5 mm Hole shape: spherical Dimensions W x D x H: 90 x 79 x 35 mm Working temperature: max. 300°C Material: anodized aluminium in...
€89.50
H 135.106 Block, 4 x 40 mL Attachment for vessels/tubes with flat bottom. Volume: 40 mL Number of holes: 4 Hole diameter and depth: 28.5 x 43.5 mm Hole shape: cylindrical Dimensions W x D x H: 79 x 79 x 45 mm Working temperature: max. 300°C Material: anodized...
€89.50
H 135.107 Block, 1 x 100 mL Attachment for round bottom flasks. Volume: 100 mL Number of holes: 1 Hole diameter and depth: 65 x 25.5 mm Hole shape: spherical Dimensions W x D x H: 79 x 79 x 30 mm Working temperature: max. 300°C Material: anodized aluminium in...
€89.50
Double beater A 11.6, titanium For use up to Mohs hardness 3. Only applicable with grinding chamber A 11.4. Not included with the analytical mill A 11 basic Material: titanium, surface-hardened
€586.00
Spare grinding chamber A 11.5, ETFE, with... Made of Tefcel (ETFE, glass fibre-reinforced) with stainless steel inlet (AISI 316L). Excellent resistance to chemicals and low temperatures (- 200 °C). Included with the analytical mill A 11 basic. Useful volume: 80 mL.
€545.00
Spare beater A 11.1, stainless steel For pulverizing substances with a Mohs hardness up to 6. Included with the analytical mill A 11 basic. Material: stainl. steel (AISI 420)
€131.00
Funnel A 11.7, PTFE, sieve made of stainless steel Prevents splashing by pouring in liquid nitrogen in the grinding chamber A 11.5. Material jacket: PTFE Material sieve: stainl. steel (AISI 316L) Not included with the analytical mill A 11 basic.
€301.00
Grinding chamber A 11.4, Useful volume 250 mL,... Made of polyamide with stainless steel inlet (AlSl 316L). Not suitable for cooling with N2, only applicable with double beater A 11.6 Not included with the analytical mill A 11 basic Useful volume: 250 ml Made of polyamid with stainless...
€738.00
Stirring shaft R 50 "high speed", incl.... With the R 50 stirring shaft, the disperser T 50 digital can be converted into a high speed stirrer. This configuration is recommended for applications that require medium to high shearing forces. The dissolver disk design of the mixing...
€2,639.00
Dispersing tool or T 25 digital, S 25 N - 10 G... Suitable for dispersing instrument T 25 digital. ST tools are recommended for use with tissue and other fibrous materials. Working range: 1 - 100 mL Stator diameter: 10 mm Immersion depth: 22 - 85 mm Materials in contact with medium:...
€1,459.00
Flow breaker The flow breaker is used to prevent vortexing and to minimize air induction into the medium. It enables the dispersing instrument to be centrally placed into the vessel without the bearing system running dry. Through this system even...
€28.00
Strap clamp RH 3 For securing vessels against walls or for synchronized rotation during stirring or dispersing. For stand diameter: 8 - 16 mm For vessel diameter: 40 - 300 mm
€363.00