No results were found for the filter!
Quick-head-dressing Quick head bandage "Capline" from Winkler is a bandage for head injuries that is quick and easy to apply. The bandage is made of polyester, elastane and cotton. The "Capline" head bandage has a breathable foam padding which ensures that...
Content 25 piece(s) (€0.70 / 1 piece(s))
from €17.51
Heating hood WMO-G Standard heating hood WMO-G for round piston. Flexible glass-fired heating element in a glazed outer shell, which is adapted to the corresponding vessel shapes and sizes. From size 500 ml with a bottom hole of 60 mm diameter. Max....
from €286.00
Housing heating hood WMO-LG WMO-LG housing heating cover for round pistons. Flexible radiator in a plastic-coated, chemical-resistant metal housing, with built-in on / off switch and heating zone switch. Max. Heating conductor temperature 450 ° C, 1.5 m mains...
from €274.00
Housing heating hood WMO-LGER, with power... WMO-LGER housing heating sleeve for round pistons Flexible radiator in a plastic-coated, chemical-resistant metal housing, with built-in on / off switch and heating zone switch and additionally built-in regulator for infinitely variable...
from €309.00
Heating hood WMO-MG3ER Housing heating cap KM-ME for round piston Equipped with a special heating element, suitable for three different sizes, in a plastic coated metal housing, with built-in on / off switch and heating zone switch and additionally built-in...
from €397.00
Temperature probe HM-TP2, Pt100, up to 500 ° C,... Temperature probe HM-TP2 Pt100 up to 500 ° C male connector V2A, 4 x 50 mm with diode connector suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 2 m temperature regulators connecting cable
€92.00
Temperature Sensors KM-TPG: Pt100, up to 250°C,... Temperature Sensors KM-TPG Pt100 up to 250°C in a glass tube, Ø 6 × 400 mm with diode plug suitable for temperature regulator KM-RX1001, KM-RX1004 and KM-RX4001 with permanently connected compensation line
€184.00
Temperature probe HM-TNF, NiCr-Ni, up to 400 °... Temperature sensor HM-TNF, NiCr-Ni up to 400 ° C with diode plug flat sensor 0.4 x 15 x 400 mm suitable for the KMRX1001, KM-RX1004 and KM-RX5001 with 1.5 m temperature regulators connecting cable
€114.00
Temperature probe HM-TNS, NiCr-Ni, up to 1200 °... Temperature probe HM-TNS, NiCr-Ni up to 1200 ° C Incocell-600 probe 1.5 x 300 mm with diode connector suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 2 m temperature regulators connecting cable
€114.00
Temperature probe HM-TP2, Pt100, until 500°C,... Temperature probe HM-TP2 Pt100 up to 500 ° C male connector V2A, 4 x 50 mm without diode connector suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 2 m temperature regulators connecting cable
€74.00
Temperature probe HM-TPG, Pt100, until 250°C,... Temperature probe HM-TPG Pt100 up to 250 ° C in the glass tube 6 x 400 mm without diode plug suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 1.5 m temperature regulators connecting cable
€165.00
Temperature probe HM-TNF, NiCr-Ni, until 400°C,... Temperature sensor HM-TNF, NiCr-Ni up to 400 ° C without diode plug flat sensor 0.4 x 15 x 400 mm suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 1.5 m temperature regulators connecting cable
€114.00
Temperature probe HM-TNS, NiCr-Ni, 1200°C,... Temperature sensor HM-TNS, NiCr-Ni up to 1200 ° C Incocell-600 rod sensor, 1.5 x 300 mm without diode plug suitable for temperature controllers KM-RX1001, KM-RX1004 and KM-RX5001 with fixed 2 m temperature regulators connecting cable
€85.00
Leistungsteller HM-L116, elektromechanisch Electromechanical power unit in a stable plastic housing for the targeted metering of the heating output of heating hoods, heating tapes, heating cables, etc Stepless power adjustment 0 - 100% installation plug switching capacity max....
€135.00
RCD (residual current detection) adapter KM-PSA16 RCD adapter KM-PSA 16 Adapter for personal protection, the operation of heating mantles with RCD (residual current detection) is imperative! This adapter is to switch between heating mantle and source of power. GS-tested. Technical...
€31.00
Stativklemme HM-SK Accessories for housing heating hoods and series heaters clamping device for tripod rods up to Ø 12 mm or for attachment of the housing heating hoods (max. 2000 mL) in tripod assemblies.
€21.00
Industrial heating hood HM-TG for ball valves,... Flexible glass heater with built-in NiCr-Ni temperature sensor in the lower heating zone. External mantle of glass fabric with four movable threaded bolts. 1.5 m cable with a multi-pole connector for heating and sensors for direct...
from €1,041.00
Metal jacket-protected heating hood WMO-MR2 Flexible glass heating radiator 2 heating zones outer jacket of a plastic-coated, chemical-resistant metal housing with built-in heating zone switch. Max. Heating conductor temperature 450 ° C 1.5 m mains supply and personal protection...
from €292.00
Temperature probe HM-TC-PT, Pt100, up to 250 °... Temperature probe HM-TC-PT Pt100 2-wire up to 250 ° C protective element V2A, 4 x 50 mm with 2 m connecting cable made of PTFE
€34.00
Temperature probe HM-TP4, Pt100, until 500°C,... Temperature probe HM-TP4 Pt100 4-wire up to 500 ° C protective element V2A, 4 x 50 mm without diode plug with 3 m connection cable made of glass fiber with steel mesh
€59.00
LabHEAT® Standard heating hood The standard heating hoods for round bottom flasks are standard equipment in chemical and biotechnological laboratories. for operating temperatures up to 450 ° C flexible glass heater uniform heat transfer and gentle treatment of glass...
from €301.00
Heating mantles protected by metallic sheath,... For flasks, round bottom with volume up to 20 With built-in controllerallows a continous adjustmentof power outlet Flexible glass yarn heating element, an even heat transfer and a gentle treatmentof the glassware Plastic-coated metal...
from €328.00
Housing heating cover WMO-LG2 for 500 mL round... Flexible glass silk radiator Outer sheath made of a plastic-coated Chemical-resistant metal housing with built-in mains and heating zone switch Max. Heatsealing band temperature 450°C
€292.00
Reihenheizgerät WMO-R6 mit 6 Plätzen LabHEAT®-Serial heating units KM-R6 for flasks, round bottom Plastic-coated, chemical-resistant metal housing with six heating positions. Each heating position is seperately controlled. Max. heating element temperature 450°C. 1.5 m power...
from €2,247.00
Products from Winkler AG
