No results were found for the filter!
Wire stand for centrifuge tubes, 2 x 3... For storage of conical centrifuge vials with 250 ml content (e.g. falcon, corning, nunc) Made of steel wire, which is coated with artificial resin The 60 mm large, squared grids offer place for 6 vessels The lower level has bars for a...
€52.70
Wire stand for centrifuge tubes, 2 x 4... Zentrifugenglasgestell aus epoxidbeschichtetem Draht, autoklavierbar Für konische 50 ml Zentrifugenröhrchen bzw. für 250 ml Zentrifugenflaschen Fachgröße: 30 x 30 mm Außenmaße LxBxH: 147 x 80 x 89 mm
€56.50
neoLab-Rack for centrifuge tubes 50 mL/250 mL Zentrifugenglasgestell aus epoxidbeschichtetem Draht, autoklavierbar Für konische 50 ml Zentrifugenröhrchen bzw. für 250 ml Zentrifugenflaschen
from €85.30
neoLab-Lead ring, closed Lead rings for weighing down of glass vessels in the water bath For the reducing of breakage of glass or escaping of chemicals With vinyl coating, especially resistant against chemicals 165 g
€40.90
neoLab-Lead ring, closed Lead rings for weighing down of glass vessels in the water bath For the reducing of breakage of glass or escaping of chemicals With vinyl coating, especially resistant against chemicals
from €40.70
Reaction tube rack neoRack® for reaction tubes... Reaktionsgefäßgestell neoRack® für Reaktionsgefäße und Kryoröhrchen Gestell für 1,5 und 2 ml Eppendorf-Reaktionsgefäße und Kryoröhrchen, mit 8 x 8 Plätzen, quadratisch Einfache Montage, die Etagen werden einfach in das Seitenteil...
€13.40
Reaction tube rack neoRack® for reaction tubes... Reaktionsgefäßgestell neoRack® für Reaktionsgefäße und Kryoröhrchen Gestell für 1,5 und 2 ml Eppendorf-Reaktionsgefäße und Kryoröhrchen, mit 8 x 8 Plätzen, quadratisch Einfache Montage, die Etagen werden einfach in das Seitenteil...
€13.40
LaboBox system for storing reaction tubes,... Stapelbarer Kasten für das LaboBox-System, mit Stülpdeckel, zur Aufnahme der LaboBox-Gestelle In zwei verschiedenen Höhen lieferbar, je nach Bestückungshöhe des Gestelles auswählen Der höhere Kasten ist auch für Objektträger 76 x 45 mm...
€12.80
neoLab-Rubber scraper rods in the set Rubber scraper rod for the removing of sticky, stiffy or other sticking substances out of vessels Rubber scraper rod with wooden handle Set with 2 sizes Scraping surface: 70 x 120 mm and 50 x 80 mm
Content 2 piece(s) (€7.30 / 1 piece(s))
€14.60
neoLab-Blades with grip Razor-sharp blades with handle bar for many purposes in the laboratory For scraping off DC-plates, for making of sections and for cleaning the residues
Content 5 piece(s) (€0.34 / 1 piece(s))
€1.70
neoLab-Laboratory knife, straight Sharp knife with stainless blade and grip-safe plastic handle This laboratory knife should be ready on hand in every drawer of every lab workers 95 mm blade
€6.26
Antistatical forceps, straight, without teeth High-qualtiy tweezers made of antistatic Vestamid® with 20 % fibreglass reinforcement Good rigidity, practically unbreakable and electrically conductive Excellent chemical resistance against acids and lyes Temperature resistance: up to...
€20.50
neoLab-DUMONT forceps Original Swiss DUMONT tweezers Of highest precision, hand-forged of Inox-high-grade steel with ultra fine tips for biology, electron microscopy etc. Delivery: individually in case with hinged lid and tip protection Made in Switzerland...
from €37.20
neoLab-Multitape dispenser for rolls up to 2.54... Handy dispenser made of resistant plastic Especially suitable for neoTape-label tapes Multitape dispenser 2-6251 Suitable for up to 15 pieces of neoTape with a length of 12.7 m or all adhesive tapes with a inner diameter of max. 2.54 cm...
€91.20
neoLab-Adhesive tape "Caution Radioactivity" Adhesive tape, yellow, with red inscription "Caution Radioactivity" For marking of contaminated working areas, instruments and vessels Roll: 66 m long and 19 mm wide
€14.90
neoLab-Hand dispenser Handy dispenser made of resistant plastic, especially suitable for neoTape-label tapes Suitable for 2 pieces of neoTape with a length of 12.7 m or all adhesive tapes with a inner diameter of max. 2.54 cm With 2 spacers and plastic clip...
€11.50
neoLab-Dispenser for adhesive tapes Adhesive tape roller, plastic Stable model Bottom side with PUR-foam Nonslip For rolls till 25 mm band width
€42.90
neoLab-Adhesive tape dispenser with labelling... Stable adhesive tape roller, plastic Gummed platform Wide bearing surface for the adhesive tape
€80.40
neoLab-Acrylic adhesive tape 19 mm, 66 m/roll neoLab-Acrylic adhesive tape Adhesive, insulating, signing tape made of acrylic with high adhesive power The cheap universal adhesive tape for marking, fixation, insulation and sealing Roll: 66 m long and 19 mm wide
€10.10
neoLab-Burette holder for 25/50 mL burettes Just squeeze the clamp and the burette is fixed and at that vertical like the tripod rod For all common burette sizes and for tripod rods from 11 - 13 mm Ø Easy mounting without screws etc., no rosting parts because it is made fully of...
€27.50
neoLab-Connector on both sides for inner Ø 1-2... Straight tube connector aus PP for small diameter. The sharp-edged connection spouts ensure a safe leakfree fit of the tubes. Autoclavable up to 121°C.
Content 10 piece(s) (€2.91 / 1 piece(s))
from €29.10
Quick-connect coupling PP without barrier, male... The 1/8" or 1/4" neoLab coupling inserts cover a wide range of standard applications, offering a high level of flexibility through many configurations and connection options. No leaks, shorter installation length, faster installation...
from €5.39
Quick-connect coupling subminiature PP The perfect connection for separating and connecting of tubes and devices. Easy handling through single-handed operation. Automatically snapping in and open the valves by the versions with barrier. With decoupling the valves are closing...
from €7.54
Products from neoLab Migge GmbH
