No results were found for the filter!
Erlenmeyer flask, PC, 250 ml Erlenmeyer flask, transparent, autoclavable, made of polycarbonate, with graduation. Narrow neck.
€21.86
Square bottle, PC Square bottle PP screw closure Ideal for general purpose storage of aqueous solutions and short-term storage of media Autoclavable Transparent Leakproof Graduated NOTE: Before autoclaving, just set closure on top of the container without...
from €4.40
Dropper bottles, white LDPE, assorted colored... Reagent identification is made easy with the multiple-color dropper bottle lab pack. Closures are red, green, blue, white and yellow The flexible, contact-clear LDPE bottle permits easy content identification and fluid fill volumes...
€2.83
Drop-Dispenser bottle, PTFE* FEP Drop-dispensing bottle made of PTFE FEP and Tefzel ETFE handles virtually any chemical you need to dispense Captive spout cap Autoclavable Case Size: 4
€100.98
Replacement fittings for quick filling venting... 6 mm, straight Replacement fittings for quick filling venting closure (cat. no. 2158-0021 and 2158-0031). Made of PP fitting with tubulation for 6 mm tube straight. Case size is 6 mm NOTE: sizes are not interchangeabl
from €15.65
Hose connection with olive and thread for Nalge... Autoklavierbare Doppelschlaucholiven mit Gewindeverschraubung VE bestehend aus zwei PP Anschlüssen, zwei Acetal-Muttern, zwei Silikondichtungen und TPE Kappe Mit diesen Kunststoff-Anschlußstücken können die meisten Verschlüsse von...
Content 2 piece(s) (€13.63 / 1 piece(s))
€27.25
Nalgene™ polypropylene quick-action spigots Incorporate these Thermo Scientific™ Nalgene™ Polypropylene Quick-Action Spigots, including an HDPE tubing adapter which accepts tubing with 1/4 or 5/16″ I.D with Nalgene Carboys to increase functionality. Takes 5/8'' (1.6 cm) I.D....
€48.09
Nalgene™ quick-action Tefzel™ ETFE spigots Employ Thermo Scientific™ Nalgene™ Quick-Action ETFE Tefzel™ Spigots as replacement spigots for Nalgene DS2327-series fluorinated carboys. They are chemically resistant to selected solvents and other chemicals. Body and plug are made of...
€128.96
Quick-fill screw cap, 83B Schnell-Befüll- und Belüftungs-Schraubverschluss 83B Ideal für den Gebrauch als Vakuumfallensystem mit den NALGENE-Ballonflaschen für hohe Beanspruchung Auslaufsicher, aber nicht autoklavierbar
from €426.65
Filling screw closure, 53B Filling/venting closures, white polypropylene, TPE gasket, TPE port caps, inside and outside 2 x NALGENE 50 platinum-cured silicone tubing each (ID 6.3 mm), closure 53 B All-plastic closures for aseptic liquid transfer of media,...
€56.83
Screw cap, 83 B Schraubverschluss PP mit 3 Anschlüssen 83B Vollkunststoff-Schraubverschluss zum sterilen Flüssigkeitstransfer von Nährmedien, biologischen Reagenzien, reinen Wasser und Chemikalien Für Anwendungen, für die Bio-Reaktoren und Fermenter...
€76.06
Screw cap, 83 B Schraubverschluss PP mit 3 Anschlüssen 83B Vollkunststoff-Schraubverschluss zum sterilen Flüssigkeitstransfer von Nährmedien, biologischen Reagenzien, reinen Wasser und Chemikalien Für Anwendungen, für die Bio-Reaktoren und Fermenter...
€67.61
Sealing cap for oak ridge centrifuge tube PP screw closure, Silicone gasket Sealing caps ensure leakproof service of NALGENE oak ridge centrifuge tubes and bottles at their recommended maximum speeds (10,000 x g or greater), even when full Also recommended for spinning hazardous...
from €19.67
Sample Vial with closure, LDPE Probenbehälter mit Deckel aus LDPE Mit festsitzendem Schnappdeckel Als Probenbehälter, Probenbecher für pH-Messungen, Wägedosen, zur Verpackung und zur allgemeinen Laboranwendung geeignet Im Gegensatz zu Polystyrolbehältern unzerbrechlich
from €1.12
Erlenmeyer flask, PC, 125 mL Erlenmeyer flask, transparent, autoclavable, made of polycarbonate, with graduation. Narrow neck.
€16.39
Erlenmeyer flask, FEP, 125 mL Erlenmeyer flask with screw cap Unbreakable, almost transparent, non-contaminating and resistant against almost all chemicals. The flasks are temperature-resistant from -270°C to + 205°C and the clsoures from - 100°C to +150°C ....
€131.87
Erlenmeyer flask, FEP, 250 mL Erlenmeyer flask with screw cap Unbreakable, almost transparent, non-contaminating and resistant against almost all chemicals. The flasks are temperature-resistant from -270°C to + 205°C and the clsoures from - 100°C to +150°C ....
€182.14
Carboy, Clear PC, with spigot Transparent carboy, PC bottle, PP spigot and white PP screw closure, TPE gasket. These tough, glass-clear, autoclavable carboys are ideal for dispensing sterile water, aqueous reagents and media. Use in cold rooms, even at subfreezing...
from €299.33
Carboy, LDPE, with spigot, with handle Carboy with spigot, LDPE bottle, PP spigot, white PP screw closure Suitable for collecting and dispensing distilled water, reagents, acids. Graduated to deliver in 1-gallon and 5- liter increments. spigot boss molded in one piece with...
from €79.61
Carboy, PP, heave duty, with handle Extra thick walls give these polypropylene carboys added strength. Choose these carboys when service conditions are most extreme. Useful as vacuum trap, will hold full vacuum up to 8 hours. Leakproof and autoclavable. For convenience,...
from €136.97
Carboy, autoclavable, PP, with handle Autoclavable carboy with handle, PP, white PP screw closure, TPE gasket. Popular round shape with handles and 83B closure, autoclavable PP. Excellent for large batches of culture media, distilled water and other solutions. Graduated to...
from €90.00
Carboy, PP, with tubulation, with handle Serrated tubulation molded in one piece with bottle, for strength and leak resistance. Outlet low on bottle for more complete drainage. Convenient wide shoulder handles for easy carrying. Are also graduated to deliver in 1-gal. and 5-L...
from €116.74
Carboy, PP, with spigot, with handle, 10 liter Autoclavable carboy with spigot, PP body, PP spigot and screw closure, TPE gasket Use for storing and dispensing solutions, media. Ideal for sterile water storage. It can be autoclaved before refilling to stop recurring algae or...
from €212.11
Carboy, HDPE, rectangular, with spigot Space-saving rectangular shape. Excellent chemical resistance, a good choice for storing and dispensing stock solutions. All sizes feature molded-in graduations. HDPE is tough, rigid, translucent. Built-in shoulder loops have sturdy...
from €181.12
Products from Nalgene™ Labware
