Top seller
No results were found for the filter!
Rapid incinerator SV/II, without temp. Control The operating temperature of about 950 ° C is reached in a few minutes after switching on. The upper floor with 8 holes each 34 mm diameter takes porcelain crucible to max. 50 mm diameter for drying, preheating and burning also liquid...
€1,182.00
Stirred heating mantles KM-MPE, flasks Stirred heating mantles KM-MPE for flasks, round bottom Design and technology identical with series KM-ME, but with additional integrated magnetic stirrer for separate activation (continuously adjustable speed up to 1,600 rpm, stirring...
from €665.00
Temperature test chamber TTC256 Temperature test chamber TTC256 The temperature test chamber TTC 256 simulates the perfect atmosphere in accordance with the standard and shortens processes by rapid temperature changes. Features: Ventilation and control technology:...
€22,889.00
Bunsen burner, DIN 30655, with air regulation DIN burners with air regulation cannot be switched off completely in accordance with standard 30665. Therefore a small flame continues to burn even when the gas tap or needle valve is closed. The gas supply must be shut off at the...
€26.80
Stainless steel grid, standard equipment, for... Stainless steel grid, standard equipment, for all models of size 30.
€60.00
Temperature controller 2860 EB, for installation The microprocessor-controlled temperature controller 2860 EB is the temperature control for the precision heating plates. After setting the setpoint value via the keyboard keypad, this is kept constant by the controller. Technical...
€1,028.00
Precision Hot Plates for continuous operation... Heating plate for use as a built-in or bench unit. Asymmetric, reaction-fast special long-term heating and heat sensors as well as performance adjustment to the heat demand precise temperatures with very good uniform temperature on the...
from €580.00
Temperature controller 2860 SR, table unit The microprocessor-controlled temperature controller 2860 SR is the temperature control for the precision heating plates. After setting the setpoint value via the keyboard keypad, this is kept constant by the controller. Technical...
€1,028.00
Cartridge burner with safety element, DIN type Cartridge burner with ignition fuse with air regulation and needle valve T=1650°C Incl. 400 mL cartridge Tribrach recommendation: 5136/5146 For protection against uncontrolled leakage of gas in the laboratory. An electrical voltage is...
€100.50
High temperature burner for cartridge High temperature burner for Usbeck cartridge with piezo ignition and needle valve T=1600°C
€50.85
Micro Burner for cartridge Micro burner for Usbeck cartridge with piezo ignition, air regulation and needle valve. T=1640°C
€41.55
Bunsen burner for cartridge Bunsen burner for Usbeck cartridge with air regulation and needle valve. T=1640°C
€42.95
Teclu burner for cartridge Teclub burner for Usbeck cartridge and air regulation and needle valve. T=1640°C
€47.00
Meker burner bottle gas Meker burner propane/ bottle gas with air regulation and needle valve tube Ø 28 mm and head Ø 32 mm
€68.50
Mekerbrenner Erdgas, Nadelventil with air regulation and needle valve tube Ø 28 mm and head Ø 32 mm
€68.50
Meker Burner - All gases Meker burner all gas with air regulation and needle valve for gas selection from below tube Ø 28 mm and head Ø 32 mm
€63.00
Peltier Thermostat PT 31, 8°C - 40°C Peltier Thermostat PT 31, 8°C - 40°C The electronic water bath-thermostat with Peltier element is a versatile and high-performance device for tempering of refractometers, polarimeters, etc. It is very robust, compact and easy to operate....
€1,499.00
Water bath additive BAD-Stabil Concentrate to prevent build-ip of algae, bacteria and fungus in water baths or thermostat loops Add 1 ml BAD-Stabil per liter of water The blue indicator shows the effectiveness of the additive When the blue coloring disappers, renew...
€19.90
