Top seller
No results were found for the filter!
Fire SCS basic RF The Fuego Basic RF sets new standards in laboratory gas burner technology. With its innovative design, this safety laboratory burner is suitable for all flame-technical applications in the laboratory. Simple and safe operation. The Fuego...
€637.00
NeoBlock heater Duo, without heating block NeoBlock heater Duo, without heating block On the basis of the small model developed thermal block heater for 2 alublocks in succession or for a large block for microtiter plates. Small footprint, great technical advantages: The stored...
€1,100.00
Heating block Eppendorf ThermoStat C Heating block Eppendorf ThermoStat C ThermoStat C, basic device without thermoblock, 220-240V. The ideal device to set and maintain temperatures precisely. For the exact Temperature-controlled heating and cooling elements (Peltier...
€2,135.00
Temperature probe HM-TP2, Pt100, up to 500 ° C,... Temperature probe HM-TP2 Pt100 up to 500 ° C male connector V2A, 4 x 50 mm with diode connector suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 2 m temperature regulators connecting cable
€92.00
Temperature Sensors KM-TPG: Pt100, up to 250°C,... Temperature Sensors KM-TPG Pt100 up to 250°C in a glass tube, Ø 6 × 400 mm with diode plug suitable for temperature regulator KM-RX1001, KM-RX1004 and KM-RX4001 with permanently connected compensation line
€184.00
Temperature probe HM-TNF, NiCr-Ni, up to 400 °... Temperature sensor HM-TNF, NiCr-Ni up to 400 ° C with diode plug flat sensor 0.4 x 15 x 400 mm suitable for the KMRX1001, KM-RX1004 and KM-RX5001 with 1.5 m temperature regulators connecting cable
€114.00
Temperature probe HM-TNS, NiCr-Ni, up to 1200 °... Temperature probe HM-TNS, NiCr-Ni up to 1200 ° C Incocell-600 probe 1.5 x 300 mm with diode connector suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 2 m temperature regulators connecting cable
€114.00
Temperature probe HM-TP2, Pt100, until 500°C,... Temperature probe HM-TP2 Pt100 up to 500 ° C male connector V2A, 4 x 50 mm without diode connector suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 2 m temperature regulators connecting cable
€74.00
Temperature probe HM-TPG, Pt100, until 250°C,... Temperature probe HM-TPG Pt100 up to 250 ° C in the glass tube 6 x 400 mm without diode plug suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 1.5 m temperature regulators connecting cable
€165.00
Temperature probe HM-TNF, NiCr-Ni, until 400°C,... Temperature sensor HM-TNF, NiCr-Ni up to 400 ° C without diode plug flat sensor 0.4 x 15 x 400 mm suitable for the KM-RX1001, KM-RX1004 and KM-RX5001 with 1.5 m temperature regulators connecting cable
€114.00
Temperature probe HM-TNS, NiCr-Ni, 1200°C,... Temperature sensor HM-TNS, NiCr-Ni up to 1200 ° C Incocell-600 rod sensor, 1.5 x 300 mm without diode plug suitable for temperature controllers KM-RX1001, KM-RX1004 and KM-RX5001 with fixed 2 m temperature regulators connecting cable
€85.00
Leistungsteller HM-L116, elektromechanisch Electromechanical power unit in a stable plastic housing for the targeted metering of the heating output of heating hoods, heating tapes, heating cables, etc Stepless power adjustment 0 - 100% installation plug switching capacity max....
€135.00
RCD (residual current detection) adapter KM-PSA16 RCD adapter KM-PSA 16 Adapter for personal protection, the operation of heating mantles with RCD (residual current detection) is imperative! This adapter is to switch between heating mantle and source of power. GS-tested. Technical...
€31.00
Stativklemme HM-SK Accessories for housing heating hoods and series heaters clamping device for tripod rods up to Ø 12 mm or for attachment of the housing heating hoods (max. 2000 mL) in tripod assemblies.
€21.00
Temperature probe HM-TC-PT, Pt100, up to 250 °... Temperature probe HM-TC-PT Pt100 2-wire up to 250 ° C protective element V2A, 4 x 50 mm with 2 m connecting cable made of PTFE
€34.00
Temperature probe HM-TP4, Pt100, until 500°C,... Temperature probe HM-TP4 Pt100 4-wire up to 500 ° C protective element V2A, 4 x 50 mm without diode plug with 3 m connection cable made of glass fiber with steel mesh
€59.00
Metal jacket-protected heating hood WMO-MR2 Flexible glass heating radiator 2 heating zones outer jacket of a plastic-coated, chemical-resistant metal housing with built-in heating zone switch. Max. Heating conductor temperature 450 ° C 1.5 m mains supply and personal protection...
from €292.00
Industrial heating hood HM-TG for ball valves,... Flexible glass heater with built-in NiCr-Ni temperature sensor in the lower heating zone. External mantle of glass fabric with four movable threaded bolts. 1.5 m cable with a multi-pole connector for heating and sensors for direct...
from €1,041.00
Heating hood WMO-MG3ER Housing heating cap KM-ME for round piston Equipped with a special heating element, suitable for three different sizes, in a plastic coated metal housing, with built-in on / off switch and heating zone switch and additionally built-in...
from €397.00
Heating hood WMO-G Standard heating hood WMO-G for round piston. Flexible glass-fired heating element in a glazed outer shell, which is adapted to the corresponding vessel shapes and sizes. From size 500 ml with a bottom hole of 60 mm diameter. Max....
from €286.00
Housing heating hood WMO-LGER, with power... WMO-LGER housing heating sleeve for round pistons Flexible radiator in a plastic-coated, chemical-resistant metal housing, with built-in on / off switch and heating zone switch and additionally built-in regulator for infinitely variable...
from €309.00
Housing heating hood WMO-LG WMO-LG housing heating cover for round pistons. Flexible radiator in a plastic-coated, chemical-resistant metal housing, with built-in on / off switch and heating zone switch. Max. Heating conductor temperature 450 ° C, 1.5 m mains...
from €274.00
Housing heating cover WMO-LG2 for 500 mL round... Flexible glass silk radiator Outer sheath made of a plastic-coated Chemical-resistant metal housing with built-in mains and heating zone switch Max. Heatsealing band temperature 450°C
€292.00
LABOGAZ® Bunsen burners, new model LABOGAZ® Bunsen burners No. 1395 For cartridges with safety valve New model Without catridge
€87.95