Top seller
No results were found for the filter!
Wide neck wash bottle, 500 mL Wide neck wash bottle made of LDPE Printed with name of contents Round natural colored Spill-proof, complete with LDPE quirt closure, natural colored riser tube Name of contents printed in German, English and French Waer-proof inks...
€6.46
Washing bottle, wide mouth, with imprint... Washing bottle made of PE-LD Highly transparent With imprint Dist. Water Cap and shower made of PP 250 mL = GL 45 500 mL = GL 45 1,000 mL = GL 63
from €6.85
Spray bottle, PP, white Spray bottle, PP, white, 400 ml Adjustable from finest atomisation up to liquid jet by simple turning Scope approx. 3-4 meter Especially suitable for disinfectant, even at difficult accessable parts, as well as in the thin-layer...
from €9.30
Drop-Dispenser bottles, LDPE Bottle made of low-density polyethylene Dispense just one drop at a time, with convenient, one-hand operation Captive spout cap stays in place when bottle is squeezed Leakproof Case Size: 72
from €4.12
Tropfflasche aus LDPE natur, weißer Verschluss NALGENE dropper bottles provide reliable, repeatable dispensing of reagents and are an excellent alternative to pipetting and other dispensing devices Excellent chemical resistance; materials are suitable for most biotech, diagnostic,...
from €2.56
Dropper bottles, white LDPE, white screw closure NALGENE dropper bottles provide reliable, repeatable dispensing of reagents and are an excellent alternative to pipetting and other dispensing devices Excellent chemical resistance; materials are suitable for most biotech, diagnostic,...
from €2.56
Tropfflasche PPCO Bottle made of low-density polyethylene copolymer Witch dropping closure Can be used to dispense sterile solutions Bottles may be autoclaved full, with tips uncapped Captive spout cap Autoclavable/Leakproof Case Size: 6
from €12.69
HPLC-Distributors for bottles PP/PP-GF HPLC bottle distributor, made of glass-reinforced polypropylene The four connection pieces allow the connection of hoses (preferably PTFE) with an outside diameter of 1.6 mm (1/16 ) to 4 mm. The hoses can be guided to the bottom of the...
from €18.77
Multiple Distributors for bottles PFA/PPS Black screw cap made of PPS for bottle thread GL 45 Insertion of tubing with a max. O.D. of 8,5 mm Very good chemical resistance, for working temperatures up to +200°C Dimensions: PFA, Necks GL 2 x 14 Body made of PTFE or PFA
from €80.46
Multiple Distributors for bottles PP, PP grew Green screw cap made of PP for bottle thread GL 45 Insertion of tubing with a max. O.D. of 8,5 mm Restricted chemical resistance, for working temperatures up to +110°C Dimensions: Necks GL 2 x 14 Body made of PP
from €75.86
Multiple Distributors with Stopcocks PTFE/PPS Black screw cap for bottle thread GL 45 Each neck with stopcock Tubing can not be inserted through the stopcocks Bores with press fit on the lower side allow the connection of tubing with O.D. 6 mm so that a connection to the bottom can...
from €141.66
Multiple Distributors for bottles PTFE/PPS Black screw cap Body made of PTFE Dimensions: GL 45, For tubing O.D. max. mm 2 x 14, 2 x GL 25 Made of PPS
from €142.46
Weithals-Dose, HDPE Natural, round Without closure Especially suitable for storing or shipment of powdery or grained substances. Wide neck for easy filling and cleansing. Please order separately: black closure with PE foam layer, leakproof Scopes: removing,...
from €1.03
Straight side jar, PP Straight side wide mouth jar Transparent, autoclavable From size 125 ml with depression in the polypropylene screw closure for stacking Leakproof Cap diameter 38 mm
from €2.95
Jar straight side, PC Jars Straight side, wide mouth Transparent Autoclavable From size 125 ml with depression in the polypropylene screw closure for stacking Leakproof Cap diameter 38 mm
from €5.01
Straight side jar, PMP Autoclavable, transparent jar with good chemical resistance. With screw closure made of PP. Suitable as archive container, formaldehyde loss only 2% per year. IMPORTANT: Screw off lock before autoclaving.
from €6.41
Erlenmeyer Flasks PTFE, with ground joint Erlenmeyer flask Made of fluoroplastic/PTFE With standard ground joint Thicked-walled suitable for vacuum
from €134.10
2-neck bottom flask, PFA Two neck-cut round-bottomed flask PFA Made of fluoroplastic, non-porous With central center- and lateral ground joint necks for insertion of thermocouples, electrodes or hoses Conditionally vacuum suitable, e.g. at 30 mbar and a...
from €400.36
3-neck bottom flask, PFA Three-neck round bottom flask ground PFA Made of fluoroplastic, non-porous With central center- and lateral ground joint necks for insertion of thermocouples, electrodes or hoses Conditionally vacuum suitable, e.g. at 30 mbar and a...
from €563.43
Round bottom flask, PFA, NS 29/32 Round bottom flask PFA Transparent Can be used as a safety flask for rotary evaporators High temperature and chemical resistance
from €94.63
Carboy, HDPE natural, without stopcock connection Carboy without stopcock connection, incl. closure, blue printed litre scale. For storing, transport and filling.
from €38.66
Tube 4 mL, PP Polypropylene tubes have particularly good thermal, chemical and mechanical stability Material is ideally suited for the storage of chemical and biological samples Appropriate grip stopper, Cat.-No. 303 321
€0.05
Tube, PP, round bottom, graduated tubes, PP, natural, round bottom Free of detectable DNase, RNase and human DNA, free of detectable endotoxins With two-position venting plug that fulfils two functions: easy insertion of the plug allows even venting of the tube and when...
from €0.22