Top seller
No results were found for the filter!
E 350 injector carriage 1/1 E 350 injector carriage 1/1 with 33 nozzles: For narrow neck 15 x E 351 injector nozzle 4,0 x 160 mm 15 x E 353 detent for nozzle 4,0 x 160 mm 18 x E 352 injector nozzle 6,0 x 220 mm 18 x E 354 detent for nozzle 6,0 x 220 mm 1 x flush...
€1,928.00
E 404/1 injector carriage for 38 pipettes E 404/1 injector carriage for 38 pipettes. Fits in G 7883. For 38 pipettes in 3 lines: 1. line 10 pipettes - 100 ml (length up to 550 mm) strut gap mount, 20 mm 2. line 14 pipettes - 25 ml strut gap mount, 26 mm 3. line 14 pipettes - 10...
€1,839.00
E 340 injector carriage 1/2 E 340 injector carriage 1/2 multi-purpose with 19 nozzles: For narrow neck Half verifiably with other inserts 3/3/3 nozzles 4,0 x 140/160/180 mm 3/3/4 nozzles 6,0 x 200/220/240 mm 1 flush nozzle for flour dosing unit Dimensions WxDxH 55...
€954.00
E 139/1 insert 1/4 for test tubes up to 12 x... E 139/1 insert 1/4 for approx. 200 test tubes up to 12 x 200 mm. Fits in lower basket. Separated in 6 surfaces, incl. lid A 13, mesh width 9 x 9 mm. Height 223 mm (243 mm), Width 200 mm, Depth 320 mm.
€318.00
E 414 injector carriage 1/1 with TA, for narrow... E 414 injector carriage 1/1 with TA with 37 nozzles: 4/3 nozzles 2,5 x 90/110 mm 5/5/5 nozzles 4,0 x 140/160/180 mm 5/5/5 nozzles 6,0 x 200/220/240 mm 1 rinse nozzle for flour dosing unit Connection for hot-air-dryer Holding device for...
€1,575.00
A 11/1 insert 1/1 component frame A 11/1 insert 1/1 component frame 429 x 429 mm. Component frames with punch-outs 7 x 7 mm, fits in upper and lower basket, made of stainless steel, width x depth 429 x 429 mm.
€103.00
E 109 insert 1/2 for beakers up to 250 ml E 109 insert 1/2 for 21 beakers up to 250 ml. 21 x 3 support rod, fits in lower basket. Height 155 mm, width 230 mm, depth 460 mm.
€282.00
E 408 injector carriage TA for 116 pipettes E 408 injector carriage TA for 96 pipettes up to 450 mm. Surface size 16 x 16 mm, complete with holder frame in a height of 150 mm, connection for hot-air-dryer, holding device for magnetic strip ML/2. Height 502 mm, width 533 mm, depth...
€1,796.00
E 406 injector carriage for 116 pipettes E 406 injector carriage for 116 pipettes up to 450 mm. Fits in G 7883. Surface size 16 x 16 mm. Complete with holder frame in a height of 150 mm. Without holding device for magnetic strip ML/2. Height 502 mm, width 533 mm, depth 516 mm....
€1,587.00
E 105/1 insert 1/4 for test tubes up to 12 x... E 105/1 insert 1/4 for approx. 200 test tubes up to 12 x 165 mm. Fits in lower basket. Seperated in 6 surfaces, incl. lid A 13, mesh width 9 x 9 mm. Height 192 mm (212 mm), width 200 mm, depth 320 mm.
€308.00
E 104/1 insert 1/4 for test tubes up to 12 x... E 104/1 insert 1/4 for approx. 200 test tubes up to 12 x 105 mm. Fits in upper and lower basket. Seperated in 6 surfaces, incl. lid A 13, mesh width 8 x 8 mm. Height 132 mm (152 mm), width 200 mm, depth 320 mm.
€275.00
E 103/1 insert 1/4 for test tubes up to 12 x 75 mm E 103/1 insert 1/4 for approx. 200 test tubes up to 12 x 75 mm. Fits in upper and lower basket. Seperated in 6 surfaces, incl. lid A 13, mesh width 8 x 8 mm. Height 102 mm (122 mm), width 200 mm, depth 320 mm.
€264.00
A 150 lower basket Lower basket with two module couplings For holding up to two injector modules Automatic closure of couplings when not in use Assembly height when using a module with plastic support in combination with: A 100 H 190 mm A 101 H 215 ± 30 mm...
€520.00
A 101 upper basket Height adjustable, for the optimum loading of inserts Vertical clearance 160 +/- 30 mm, width 475 mm, depth 443 mm With integrated spray arm Dimensions: H 206, W 528, D 527 mm
€434.00
