Top seller
No results were found for the filter!
Funnel with lid MARCO, S51, PE-HD, Type 1 The robust safety funnel MARCO made of high-performance plastic offers reliable work protection and chemical resistance: thanks to the hinged lid with integrated seal, even harmful solvent residues cannot escape. The removable dirt sieve...
Content 1 piece(s)
€96.32
8-in-1 Collector for tube connector vertical Typ 2 PTFE/PFA 8 x 3.2 mm OD Thread size: NPT 1/8"
Content 1 piece(s)
€81.10
Exhaust Filter L for Safety Waste Caps, 2 pieces V3.0 with splash guard and change label GL14 Service life 6 months
Content 2 piece(s)
from €164.43
Exhaust Filter S for Safety Waste Caps, 4 pieces V3.0 with splash guard and change indicator GL14 Service life 3 months
from €60.80
Collecting Try with base insert Type 1 PE-HD electrostatic conductive dimensions: 285 x 95 x 385 (WxHxD) (interior)
Content 1 piece(s)
€273.04
Exhaust Filter Mfor Safety Waste Caps, 1 piece V3.0 with splash guard and change label GL14 Service life 6 months
Content 1 piece(s)
€90.23
Exhaust Filter L for Safety Waste Caps, 1 piece V3.0 with splash guard and change indicator GL14 Service life 12 months
Content 1 piece(s)
€130.94
Antistatic Floor Mat Ethylenevinylacetate Dimensions: 610 x 1220 x 3 mm (WxHxD)
Content 1 piece(s)
€161.39
2-in-1 Collector for tube connector sideways PTFE 2 x 6.4 mm ID Thread size: NPT 1/8"
Content 1 piece(s)
€55.72
Adapter for funnel, mechanical level control Barrel doeble Thread - Thread size: R2" BSP/G2" (m) + BCS / BSC 56x4 (m) Main meterial: PE-HD-EL GL45 (m)
Content 1 piece(s)
€252.74
Safety Waste Cap, PTFE, GL 45 SCAT Safety Waste Caps are hermetically sealing caps for the safe disposal of solvents and HPLC waste. The SCAT exhaust filter with three layers of activated carbon binds vapours from solvents, acids and alkalis. This additionally...
Content 1 piece(s)
€81.10
High-pressure micro cell High-pressure micro cell, 6mm, 1.7ul, 400bar. for Agilent G1315A/B, G1365A/B diode array and multiple wavelength detectors
Content 1 piece(s)
€4,149.00
Needle clamp kit Needle clamp kit consisting of: needle clamp and two clamp screws
Content 1 piece(s)
€57.00
Insulator Kit for NPD, ceramic Insulator Kit for NPD, ceramic suitable for 7890/6890/6850 NPD
Content 1 piece(s)
€371.00
Exhaust Filter M for Safety Waste Caps, 2 pieces V3.0 with splash guard and change indicator GL14 Service life 6 months
Content 2 piece(s)
€171.54
Water, UHPLC-MS, 1 L, glass bottle Unique signal-to-noise specification for the chemical industry, where the solvent quality is directly linked to the sensitivity of the mass spectrometer. Filled in clear borosilicate glass bottle.
€71.90
HPLC Supply Set I type 2 HPLC Supply Set I type 2 - 1 x Safety Cap I, GL45 - 1 x air valve - 1 x change indicator - 1 x 1000 ml laboratory bottle square & clear glass - 1 x 1,5 m capillary 3,2 mm AD - 1 x PTFE suction filter - 1 x PFA fitting 1,6 mm OD - 2 x PFA...
€110.00
HPLC Starter Kit 3, Supply HPLC Starter Kit 3, Supply: - 4 x Safety Cap III, GL45 - 4 x air valve - 4 x change indicator - 12 x PFA fitting 1.6 mm OD, green - 12 x PFA fitting 2.3 mm OD, violet - 12 x PFA fitting 3.2 mm OD, blue - 8 x PFA blind plugs - 4 x...
€299.00