Top seller
No results were found for the filter!
Needle seat, Agilent G2260A autosampler, 0.50... Needle seat, Agilent G2260A autosampler, 0.50 mm id, 20 uL
€203.00
Frit adapter, PTFE, for 1/8 in od tubing to 6... Frit adapter, PTFE, for 1/8 in od tubing to 6 mm id inlet frit, prep
€31.00
TCD filament block assembly, manifold EPC... TCD filament block assembly, manifold EPC design, standard TCD analysis, for Agilent 6890 GC
€4,465.00
Standard flow cell, 10 mm, 14 uL for 1200... Standard flow cell, 10 mm, 14 uL for 1200 Series Variable Wavelength Detector with RFID tag
€2,066.00
Membrane replacements-BTU, Genie 170GENIE 170,... Membrane replacements-BTU, Genie 170GENIE 170, 5/pk
Content 5 piece(s) (€129.20 / 1 piece(s))
€646.00
Caffeine standards kit Caffeine standards kit. Includes caffeine at 5, 25, 125, 250, 500 ug/mL in water, 5 ampules
€307.00
AED Performance evaluation sample - Dangerous Good AED Performance evaluation sample - Dangerous Good
€155.00
Vacuum chamber replacement kit Vacuum chamber replacement kit. Includes two combined chambers for two solvent channels, and tubing kit 5067-5380
€3,225.00
Calibration sample, glycogen, Agilent 1100... Calibration sample, glycogen, Agilent 1100 fluorescence detector G1321A, 1 g
€244.00
Nebulizer, K-style (Conikal, concentric, glass,... Nebulizer, K-style (Conikal, concentric, glass, recommended for routine analysis of organic solvents and samples with up to 5% dissolved solids. Includes sample, gas inlet fittings
€958.00
Torch, low-flow, quartz, 0.8 mm id injector... Torch, low-flow, quartz, 0.8 mm id injector tube, for axial ICP, recommended for routine analysis of volatile organic solvents e.g. gasoline
€1,119.00
Tubing, stainless steel, 0.17 mm id, 800 mm,... Tubing, stainless steel, 0.17 mm id, 800 mm, with fittings
€151.00
Liner, split only with glass wool, not deactivated Liner, split only with glass wool, not deactivated
€37.00
Liner, deactivated tapered borisilicate,... Liner, deactivated tapered borisilicate, glasswool, splitless only
€52.00
Probe, inert, 0.8 mm id, PTFE-sleeved, for SPS... Probe, inert, 0.8 mm id, PTFE-sleeved, for SPS 3 autosampler (without diluter) for AA operation
€493.00