Top seller
No results were found for the filter!
HPLC Reservoir bottle DURAN, GL45, Laboratory bottle, clear glass & round, cap and pouring ring Storage bottles with reservoir for HPLC solvents, compatible with the SCAT system. Very good chemical resistance, inert behaviour, high service temperature, minimal thermal...
Content 1 piece(s)
from €249.00
Safety Waste Cap LISA, V3.0, S55, electrostatic... Safety Waste Cap LISA, V3.0, S55, electrostatic conductive, 4x 1,6/2,3/3,2 mm OD, 4x PFA-blind plug, 3x 5,0 - 11,5mm ID, 3x PTFE-blind plug + connector for exhaust filter
Content 1 piece(s)
€184.00
Safety Waste Cap LISA, V3.0, S90, electrostatic... Safety Waste Cap LISA, V3.0, S90, electrostatic conductive, 4x 1,6/2,3/3,2 mm OD, 4x PFA-blind plug, 3x 5,0 - 11,5mm ID, 3x PTFE-blind plug + connector for exhaust filter
Content 1 piece(s)
€184.00
Safety Waste Cap LISA, V3.0, S70/71,... Safety Waste Cap LISA, V3.0, S70/71, electrostatic conductive, 4x 1,6/2,3/3,2 mm OD, 4x PFA-blind plug, 3x 5,0 - 11,5mm ID, 3x PTFE-blind plug + connector for exhaust filter
Content 1 piece(s)
€184.00
Safety Waste Cap LISA, Extension,... Safety Waste Cap LISA, Extension, electrostatic conductive, 4x 1,6/2,3/3,2 mm OD, 4x PFA-blind plug, 3x 5,0 - 11,5mm ID, 3x PTFE-blind plug + connector for exhaust filter
Content 1 piece(s)
€124.00
Safety Waste Cap, S50, PTFE-EL Safety Waste Cap, S50 for space-saving canisters, electrostatic conductive: 2 x PFA fitting 2.3 mm OD 2 x PFA fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter
Content 1 piece(s)
€129.00
Safety Waste Cap, S60/61, PTFE-EL Safety Waste Cap, S60/61, electrostatic conductive: 2 x PFA fitting 2.3 mm OD 2 x PFA fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter
Content 1 piece(s)
€129.00
Safety Waste Cap, S70/71, PTFE-EL Safety Waste Cap, S70/71, electrostatic conductive: 2 x PFA fitting 2.3 mm OD 2 x PFA fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter
Content 1 piece(s)
€149.00
Safety Waste Cap, S90, PTFE-EL Safety Waste Cap, S90, electrostatic conductive: 4 x PFA fitting 2.3 mm OD 4 x PFA fitting 3.2 mm OD 1 x PP tube connector 5.0 - 11.5mm ID 1 x GL14 connection for exhaust filter
Content 1 piece(s)
€149.00
Multi-Draw-Kit, Bio-inert, PEEK Multi-Draw-Kit, for the bioinert automatic autosampler. For adding an injection volume of 400 µl or 1400 µl.
€1,046.00
Berrytec® syringe filter with PTFE membrane,... Berrytec® syringe filters with hydrophobic PTFE membrane are suitable for the filtration of acids, alkalis, solvents, non-polar liquids, gases and many chemicals.
Content 100 piece(s)
from €69.00
Crimp closure, N 20, Alumonium, hole, 100 pieces These closures with a high-purity silicone/PTFE moulded disc are only laminated with PTFE in the area of contact with the sample. In this way, the elastomeric silicone can achieve a particularly good seal on the glass edges of the...
Content 100 piece(s)
€47.50
Screw neck vial, flat bottom, clear, N 24, 40.0... Vial dimensions: 27.5 mm x 95.0 mm Clear glass, 1st hydrolytic class glass
Content 100 piece(s)
€41.30
PerformancePLUS™ Check Valve Cartridge, 2 pieces The PerformancePLUS™ cartridge check valves are used with pumps that have the PerformancePLUS cartridge check valve system installed. The PerformancePLUS cartridge check valve system can be used as either an inlet or outlet valve in the...
Content 2 piece(s) (€161.00 / 1 piece(s))
€322.00
Inlet liner, diameter 4/6,25 mm, length 78,5... Inlet liner, diameter 4/6,25 mm, length 78,5 mm, Ultra inert, split, straight, glass wool, volume 900 µL
Content 1 piece(s)
€47.00
Crimp closure, N 20, Butyl dark gray/PTFE gray,... These closures with molded Butyl/PTFE septa are only laminated with PTFE in the contact area with the sample. Thus the elastomeric Butyl can achieve on the vial's glass rims a very tight seal, while in comparison a completely PTFE...
Content 100 piece(s)
€57.00