Top seller
No results were found for the filter!
Safe-Lock Tubes 2.0 mL Safe-Lock Tubes 2.0 mL Reaction vessels made of PP with high chemical resistance Available in different colors Graduated Shallowly writable Safe-Lock lid Thin membrane in lid Roughen inscriptions Centrifugeable up to 25.000 x g...
Content 1000 piece(s) (€0.07 / 1 piece(s))
from €68.60
Safe-Lock Tubes 0.5 mL Safe-Lock Tubes 0.5 mL Reaction vessels made of PP with high chemical resistance Available in different colors Graduated Shallowly writable Safe-Lock lid Thin membrane in lid Roughen inscriptions Centrifugeable up to 30.000 x g...
Content 500 piece(s) (€0.10 / 1 piece(s))
from €49.70
Safe-Lock Tubes, 1.5 mL Safe-Lock Tubes 1.5 mL Reaction vessels made of PP with high chemical resistance Available in different colors Graduated Shallowly writable Safe-Lock lid Thin membrane in lid Roughen inscriptions Centrifugeable up to 30.000 x g...
Content 1000 piece(s) (€0.05 / 1 piece(s))
from €50.20
Microcentrifuge Tube attached lip seal screw... Reaction vessels made of PP PP, non-sterile, not graduated, screw cap PE. Temperature range: -90°C to +100°C. Separately available: colored cap inserts (PP) for identification.
€0.14
Microcentrifuge tubes, PP, with screw cap, sterile The cover thread (PP) and reaction tube (PP) are perfectly matched, and in combination with the silicone seal offer reliable protection against liquid leakage or penetration. Sterile reaction tubes are delivered with attached screw-on...
from €0.36
Reaction vessels without screw cap, graduated Reaction vessels made of PP PP, graduated. With frosted marking area. Operating range: -196°C to 121°C. Autoclavable at 121°C (2 bar), acc. DIN EN 285 Separately available: colored screw caps and cap inserts.
€0.11
DNA LoBind Tubes, PCR clean DNA LoBind Tubes Maximum recovery of DNA/RNA Below 1% loss at low concentrations under critical conditions (high salt concentration, short DNA fragments ( Free from any kind of surface coating (eg silicone) Ideal for applications with...
Content 250 piece(s) (€0.07 / 1 piece(s))
from €16.40
Protein LoBind Tubes, PCR clean Eppendorf Protein LoBind Tubes are specifically designed for proteomics and other areas of protein research where protein concentration is often very low and sample recovery is critical for assay results. This allows significantly more...
Content 100 piece(s) (€0.12 / 1 piece(s))
from €11.90
Microcentrifuge Tube attached lip seal screw... Microcentrifuge Tube attached screw cap (PP) with seal, non-sterile PP, graduated, screw cap PP. With frosted marking area.Temperature range: -196°C to 121°C. Autoclavable at 121°C (2 bar), acc. DIN EN 285. Separately available: colored...
€0.21
IsoTherm-System Starter Set, for 0.5 mL tubes IsoTherm system (starter set for reaction vessels) Absorption of 24 reaction vessels IsoPack No more melting ice baths (the risk of contamination is reduced) All system components can be used individually Racks stackable, autoclavable...
€179.00
IsoPack and IsoRack Set IsoPack and IsoRack Set for IsoTherm System Absorption of 24 reaction vessels IsoPack No more melting ice baths (the risk of contamination is reduced) All system components can be used individually Racks stackable, autoclavable and...
€58.90
PCR Tubes attached cap. 0.2 mL 0.2 ml PCR tubes with attached lid Flat cap PP 0.2 ml and 0.5 ml PCR tubes with attached caps are compatible with leading thermal cyclers with heated lids The caps are easy to open and close, yet ensure a tight fit to reduce sample...
€0.06
Strips 8 PCR tubes w/o cap PCR 8er-Strips Röhrchen, PP, 0,2 mL PP 8 connected 0.2 mL tubes Separate, domed or flat lids are available in strips of 8 They are easy to open and close without tools The tubes have a holding strap at one end, and the cover strips on...
Content 125 piece(s) (€0.76 / 1 piece(s))
from €94.70
Cap Strips, flat (strip of 8) The uniform wall thickness and smooth wall surface of these thin-walled polypropylene vessels ensure efficient heat transfer into the sample. The vessels are delivered in a heat-sealed bag to ensure maximum purity. A and H markings at...
Content 120 piece(s) (€0.68 / 1 piece(s))
€81.40
PCR Tube Strips 0.1 mL, without cap (strips of... The uniform wall thickness and smooth wall surface of these thin-walled polypropylene vessels ensure efficient heat transfer into the sample. The vessels are delivered in a heat-sealed bag to ensure maximum purity. A and H markings at...
Content 120 piece(s) (€1.23 / 1 piece(s))
€147.00
Reaction vessels with thread and cap, graduated Sterile reaction vessels made from PP with cap, tightly closing through high-quality O-ring gasket. Graduated, with white labeling field. Sterile packaging in 10 bags with 50 pieces each
Content 500 piece(s) (€0.42 / 1 piece(s))
from €211.44
PCR Tubes with attached cap 0.2 ml PCR tubes with attached lid Domed cap PP 0.2 ml and 0.5 ml PCR tubes with attached caps are compatible with leading thermal cyclers with heated lids The caps are easy to open and close, yet ensure a tight fit to reduce sample...
€0.07
Reaction vessels with lid, 1.5mL volume For single use Attached lid is punctureable Transparent
Content 1000 piece(s) (€0.01 / 1 piece(s))
€12.25
Reaction vessels, 1.5 ml, PP, colourless, with... With lid and lid lock. Matt marking field and graduation for approximate reading of the volume, free of RNase, DNase and endotoxins. With 8.3 mm diameter and 0.4 mm thickness cover membrane. RZB max. 30000 g.
€48.65
PCR Tubes attached cap 0.2 mL PCR Gefäße 0.2 mL Contamination shield on hinged lid Defined lid position due to special hinge High transparency even on the tube base Etched lid for labelingTight sealing Easy to openFor use with all thermal cyclers with 0.2 mL block...
Content 1000 piece(s) (€0.16 / 1 piece(s))
€158.00
PCR Tubes, 8-tube strips PCR Vessels 8 Series Contamination shield on hinged lid Defined lid position due to special hinge High transparency even on the tube base Etched lid for labelingTight sealing Easy to openFor use with all thermal cyclers with 0.2 mL block...
Content 120 piece(s) (€1.61 / 1 piece(s))
€193.00
Caps for tubes 1,2 mL, PP strips of 8 caps Strips of 8 lids, PE for 1,2 mL tubes
Content 120 piece(s) (€0.31 / 1 piece(s))
€37.50
Disposable reaction vessels, PP, 2 ml PP, frosted marking field and graduation for approximate reading of the volume. Free from RNase, DNase and endotoxins. 2 ml Colorless With lidela Pierceable cover membrane
€0.07
Disposable reaction vessels, PP, 0.5 ml Disposable reaction vessels, PLASTIBRAND PP, natural coloured With lid locking, PP. Frosted marking area, subdivisions for approx. volume determination. Free of endotoxins, DNase and Rnase. RCF max. 10000 g (at 20°C for 20 min)
€0.05