No results were found for the filter!
MINISTAR 20 control Overhead stirrer, max.... excellent readable, high quality glass display vibration detection with automatic switch-off in case of imbalance of the stirring tool USB interface, e.g. for documentation of all parameters or firmware updates bluetooth functionality,...
€1,505.00
MINISTAR 40 control Overhead stirrer, max.... excellent readable, high quality glass display vibration detection with automatic switch-off in case of imbalance of the stirring tool USB interface, e.g. for documentation of all parameters or firmware updates bluetooth functionality,...
€1,635.00
Stirring shaft protection type R 301 Prevents potential injuries at the rotating shafts and stirring elements. It can be directly attached to the stirring motors RW 20 digital, RW 28 digital and the EUROSTAR series overhead stirrer. R 301.1 support holder is required to fix...
€224.00
![Nanostar 7.5 digital]](https://shop.fleischhacker.biz/media/image/df/8d/2b/7728813_200x200@2x.jpg "Nanostar 7.5 digital]")
Nanostar 7.5 digital] The overhead stirrer NANOSTAR 7.5 digital is 30 % smaller than the MICROSTAR 7.5 digital and therefore even more space-saving. However, its performance remains the same. NANOSTAR 7.5 digital convinces with perfect basic functionalities,...
€1,006.00
FK 1 Flexible coupling For stirring tasks in glass apparatus with KPG stirrers, to compensate for inaccuracies in construction. Clamping range: 6 – 10 mm Max. torque: 10 Ncm
€377.00
Stainless steel sensor H 62.51 Replacement sensor for ETS-D5 and ETS-D6 Immersion depth 230 mm Diameter 3 mm Length 260 mm Material AISI 316 Ti
€245.00
Centrifugal stirrer-R 1355 2-wing, the wings open as the speed increases. For stirring in bulbous vessels with a narrow neck. Effect similar to propeller stirrer, 4 blades. Medium to high speeds required. Wavelength: 550mm Shaft diameter: 8mm Stirrer diameter:...
€279.00
Propeller stirrer Type R 1381 Flow-optimised shape. Suction of the mix from above and below, low shear forces. For use at medium to high speeds. 3-bladed Shaft length: 350 mm Shaft diameter: 8 mm Stirrer diameter: 45 mm.
€373.00
Boss Head R 271 Special cross sleeve with clamping openings for the R 2722 and R 2723 tripods and for brackets with Ø 16 mm. Clamping range stand: 34 mm Clamping range extension arm: 16 mm Material: Cast aluminium
€238.00
Oil bath attachment type H 30, 1,5L The oil bath attachment H 30 can be used as oil baths together with an IKAMAG® magnetic stirrer with heating or with an IKATHERM® heating plate having a diameter of 135 mm. Positioning border prevents sliding on the heating plate Safety...
€315.00
Stand R 2722, 460 x 420 mm Diameter of stand rod: 34 mm Dimensions (W x D): 460 x 420 mm Height: 1010 mm Max. Weight load: 10 kg
€851.00
Telescopic stand type R 2723 Diameter of stand rod: 34 mm Dimensions (W x D): 460 x 420 mm Height: 620 - 1010 mm Max. Weight load: 10 kg Stroke: 390 mm
€1,578.00
Star knife-M 23 Used to crush fibrous substances such as paper and vegetation, but also for plastics and material with a low specific weight.
€237.00
Dispersing tool for T 25 digital, S 25 KV - 18 G Dispersing tool for T 25 digital drive. For working under vacuum. Bearing by means of ball bearing and mechanical seal (SiC = counter and sliding ring, O-rings = Kalrez). Technical data: Volume range (H2O) [l]: 0.01 - 1.5 Stator diameter...
€2,466.00
Dispersing tool for T 50 digital, S 50 N - G 45 G Suitable for dispersing instrument T 50 digital Working range: 0,5 - 20 l Stator diameter: 45 mm Immersion depth: 70 - 250 mm Materials in contact with medium: PTFE, AISI 316L Suitable for solvents: yes Max. temperature: 180 °C...
€3,624.00
Propeller stirrer type R 1388, 3-blade Streamlined shape. Suction of the mix from bottom to top, low shear forces. For use at medium to high speeds. Shaft length: 800 mm, Shaft diameter: 10 mm, Stirrer diameter: 140 mm
Content 1 piece(s)
€444.00
Dispersing tool, Ø 7 mm, plastic, 24 pieces Plastic dispersing element for T 10 basic and T 10 standard Working range: 1 - 40 ml Diameter: 7 mm Immersion depth: 20 - 90 mm Material: PC, PSU Max. temperature: 100°C Autoclavable
Content 24 piece(s)
€627.00
Dry block heater, 4 blocks Digital block heater for four aluminum blocks provides precise temperature control in small vessels. Included PT-1000 temperature sensor allows temperature control directly in the sample vessel. It is used with PCR tubes, PCR strips,...
€2,078.00
Stand R 104, 360 mm high, for T 10 basic and RW... Small stand for T 10 basic and T 10 standard. Diameter of support rod: 10 mm Dimensions (W x D): 242 x 355 mm Height: 370 mm Max. load: 0,7 kg
€208.00
S 10 N - 8 G ST Dispersing tool, for T 10 basic... Suitable for dispersing instrument T 10 basic and T 10 standard, suitable for use with tissue and other fibrous materials. Working range: 1 - 50 ml Stator diameter: 8 mm Immersion depth: 20 - 95 mm Materials in contact with medium: PTFE,...
€1,687.00
T 18 mini digital ULTRA-TURRAX® dispersing... T 18 mini digital is an economical high-performance dispersing instrument with a wide speed range of 3.000 - 25,000 rpm for working volumes of up to 1.5 liters (H20). Digital speed display and adjustment Brushless motor for improved...
€1,530.00
T 25 mini control ULTRA-TURRAX® dispersing... The T 25 mini control is a high-performance dispersing instrument with a wide speed range of 600 - 25,000 rpm for working volumes of up to 1.5 liters (H20). Digital speed display and adjustment Brushless motor for improved motor...
€2,244.00
R 1825 Plate stand, R1825, diameter rod 16 mm,... With slip resistant foil Diameter of support rod: 16 mm Max. load: 5 kg Dimensions (W x D): 200 x 316 mm Height: 560 mm
€355.00
Products from IKA®
